Research Article
Extruded and Injection Moulded Virgin PA 6/6 as Abrasion Resistant Material
Table 2
Wear test conditions.
| Test variables | Levels used for the test variables |
| Material production | Injection moulded PA6/6 | Extruded PA6/6 | Abrasive paper (SiO2 particle size) | P100 (162 m) | P240 (58.5 m) | Load [N] (contact pressure [MPa]) | 20 (0.7) | 35 (1.0) | Wear track (sliding distance [m]) | Nonoverlapping (5.5) | Overlapping (50) | Sliding velocity [m/s] | 0.08 |
|
|