Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2017, Article ID 2509879, 12 pages
Research Article

Dynamic Characterization of Rubber O-Rings: Squeeze and Size Effects

1Division of Production Engineering, Machine Design and Automation, KU Leuven, Leuven, Belgium
2Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy
3Leuven Air Bearings, KU Leuven, Leuven, Belgium

Correspondence should be addressed to Federico Colombo; ti.otilop@obmoloc.ociredef

Received 2 May 2017; Accepted 13 June 2017; Published 12 July 2017

Academic Editor: Michel Fillon

Copyright © 2017 Farid Al-Bender et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Farid Al-Bender, Federico Colombo, Dominiek Reynaerts, Rodrigo Villavicencio, and Tobias Waumans, “Dynamic Characterization of Rubber O-Rings: Squeeze and Size Effects,” Advances in Tribology, vol. 2017, Article ID 2509879, 12 pages, 2017.