Table of Contents Author Guidelines Submit a Manuscript
Advances in Tribology
Volume 2017, Article ID 8901907, 16 pages
Research Article

A Novel Two-Disc Machine for High Precision Friction Assessment

Chair of Mechanical Engineering, Montanuniversität Leoben, Franz-Josef-Straße 18, 8700 Leoben, Austria

Correspondence should be addressed to Jakob Moder;

Received 13 March 2017; Revised 18 May 2017; Accepted 25 May 2017; Published 28 June 2017

Academic Editor: Michael M. Khonsari

Copyright © 2017 Jakob Moder et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. E. Merritt, “Worm gear performance,” Proceedings of the Institution of Mechanical Engineers, vol. 129, no. 1, pp. 127–194, 1935. View at Publisher · View at Google Scholar
  2. Deutsches Institut für Normung, Din 3990-1, 1987,
  3. H. Wittel, D. Muhs, D. Jannasch, and J. Voßiek, Roloff/Matek Maschinenelemente, Normung, Berechnung, Gestaltung; 21. vollständig überbearbeitete Auflage, Springer, 2013. View at Publisher · View at Google Scholar
  4. A. Trausmuth, I. Godor, M. Stoschka, A. Dietrich, and W. Eichlseder, “Load-carrying capacity prediction of different plasma nitrided, case hardened and quenched specimens under rolling contact loading,” in Proceedings of the European Conference on Tribology, 2011.
  5. A. Trausmuth, Rolling contact fatigue of nitrided, case-hardened and quenched specimens [Ph.D. thesis], Montanuniversität Leoben, 2012.
  6. A. Doleschel, Wirkungsgradberechnung von Zahnradgetrieben in Abhängigkeit vom Schmierstoff [Ph.D. thesis], Technische Universität München, 2003.
  7. K. Bobzin, T. Brögelmann, K. Stahl, K. Michaelis, J. Mayer, and M. Hinterstoißer, “Friction reduction of highly-loaded rolling-sliding contacts by surface modifications under elasto-hydrodynamic lubrication,” Wear, vol. 328-329, pp. 217–228, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Meneghetti, A. Terrin, and S. Giacometti, “A twin disc test rig for contact fatigue characterization of gear materials,” Procedia Structural Integrity, vol. 2, pp. 3185–3193, 2016. View at Publisher · View at Google Scholar
  9. O. Kreil, Einfluss der Oberflächenstruktur auf Druckverteilung und Schmierfilmdicke im EHD-Kontakt [Ph.D. thesis], Technische Universität München, 2008.
  10. S. Akbarzadeh and M. M. Khonsari, “Experimental and theoretical investigation of running-in,” Tribology International, vol. 44, no. 2, pp. 92–100, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Masjedi and M. M. Khonsari, “Theoretical and experimental investigation of traction coefficient in line-contact EHL of rough surfaces,” Tribology International, vol. 70, pp. 179–189, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Kleemola and A. Lehtovaara, “Experimental evaluation of friction between contacting discs for the simulation of gear contact,” Lubrication Science, vol. 13, no. 1, pp. 13–20, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Krampl, F. Grün, and I. Godor, “Numerical and experimental investigation of non-conformal lubricated contacts,” in Proceedings of the Nordic Symposium on Tribology, 2012.
  14. J. Moder, H. Krampl, and F. Grün, “Tribological analysis of lubricated non-conforming contacts,” in Proceedings of the ÖTG Symposium, 2014.
  15. SIEMENS, “SIMATIC HMI Devices, Operating Instructions,” 2015.
  16. SIEMENS, “Simotion Scout TIA Configuration Manual,” 2014.
  17. SIEMENS, “S120 Drive Functions Manual,” 2015.
  18. SIEMENS, “1FT7 Synchronous Motors Operating Instructions,” 2015.
  19. R. Gohar, Elastohydrodynamics, World Scientific, 2001. View at Publisher · View at Google Scholar
  20. W. Habchi, P. Vergne, S. Bair, O. Andersson, D. Eyheramendy, and G. E. Morales-Espejel, “Influence of pressure and temperature dependence of thermal properties of a lubricant on the behaviour of circular TEHD contacts,” Tribology International, vol. 43, no. 10, pp. 1842–1850, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Björling, Friction in elastohydrodynamic lubrication [Ph.D. thesis], Luleå Tekniska Universitet, 2014.
  22. R. Parkinson, “Properties and applications of electroless nickel,” 2001.
  23. P. Sahoo and S. K. Das, “Tribology of electroless nickel coatings—a review,” Materials and Design, vol. 32, no. 4, pp. 1760–1775, 2011. View at Publisher · View at Google Scholar · View at Scopus