Table of Contents Author Guidelines Submit a Manuscript
Review Article
International Journal of Chemical Engineering
Volume 2019, Article ID 7160972, 1 page
https://doi.org/10.1155/2019/7160972
Corrigendum

Corrigendum to “Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment”

1Department of Chemical Engineering and Energy Sustainability, Faculty of Engineering, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia
2Department of Mechanical and Manufacturing, Faculty of Engineering, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia

Correspondence should be addressed to Lennevey Kinidi; moc.kooltuo@39bbynnel

Received 16 December 2018; Accepted 19 December 2018; Published 20 February 2019

Copyright © 2019 Lennevey Kinidi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


In the article titled “Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment” [1], the order of the authors was incorrect. In addition, the name of the second author was given incorrectly as Shanti Faridah Salleh. The author’s name should have been written as S. F. Salleh. The revised authors’ list is shown above.

References

  1. L. Kinidi, I. A. W. Tan, N. B. Abdul Wahab, K. F. B. Tamrin, C. N. Hipolito, and S. F. Salleh, “Recent development in ammonia stripping process for industrial wastewater treatment,” International Journal of Chemical Engineering, vol. 2018, Article ID 3181087, 14 pages, 2018. View at Publisher · View at Google Scholar · View at Scopus