Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 175743, 6 pages
http://dx.doi.org/10.1155/2014/175743
Research Article

Finite Element Analysis of PMMA Stretch Blow Molding

UGPMM, National Engineering School of Sfax, Route Soukra Km 2.5, BP 1173, Sfax, Tunisia

Received 30 May 2014; Revised 14 August 2014; Accepted 15 August 2014; Published 27 August 2014

Academic Editor: Hailiang Yu

Copyright © 2014 Afef Bougharriou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Bendada, F. Erchiqui, and A. Kipping, “Understanding heat transfer mechanisms during the cooling phase of blow molding using infrared thermography,” NDT and E International, vol. 38, no. 6, pp. 433–441, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. F. Daver and B. Demirel, “A simulation study of the effect of preform cooling time in injection stretch blow molding,” Journal of Materials Processing Technology, vol. 212, no. 11, pp. 2400–2405, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. G. H. Menary, C. G. Armstrong, R. J. Crawford, and J. P. McEvoy, “Modelling of poly(ethylene terephthalate) in injection stretch-blow moulding,” Plastics, Rubber and Composites Processing and Applications, vol. 29, no. 7, pp. 360–370, 2000. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Peplinski and A. Mozer, “Ansys-polyflow software use to select the parison diameter and its thicknes distribution in blowing extrusion,” Journal of Polish CIMAC, 2010. View at Google Scholar
  5. K. Peplinski and A. Mozer, “Comparison of bottle wall thickness distribution obtain in real manufacturing conditions and in ansys polyflow simulation environment,” Journal of Polish CIMAC, vol. 7, pp. 231–235, 2012. View at Google Scholar
  6. K. Chung, “Finite element simulation of pet stretch/blowmolding process,” Journal of Materials Shaping Technology, vol. 7, no. 4, pp. 229–239, 1989. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Cosson, L. Chevalier, and J. Yvonnet, “Optimization by the C-NEM method of the stretch-blow molding process of a pet bottle near Tg,” International Journal of Material Forming, vol. 1, no. 1, pp. 707–710, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. B. Cosson, L. Chevalier, and G. Régnier, “Simulation of the stretch blow moulding process: from the modelling of the microstructure evolution to the end-use elastic properties of polyethylene terephthalate bottles,” International Journal of Material Forming, vol. 5, no. 1, pp. 39–53, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. C. W. Tan, G. H. Menary, Y. Salomeia et al., “Modelling of the injection stretch blow moulding of PET containers via a Pressure-Volume-time (PV-t) thermodynamic relationship,” International Journal of Material Forming, vol. 1, no. 1, pp. 799–802, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. M. Salomeia, G. H. Menary, and C. G. Armstrong, “Instrumentation and modelling of the stretch blow moulding process,” International Journal of Material Forming, vol. 3, no. 1, pp. 591–594, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. Z. J. Yang, E. Harkin-Jones, G. H. Menary, and C. G. Armstrong, “A non-isothermal finite element model for injection stretch-blow molding of PET bottles with parametric studies,” Polymer Engineering and Science, vol. 44, no. 7, pp. 1379–1390, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Gupta, V. Uday, A. S. Raghuwanshi, S. Chowkshey, S. N. Das, and S. Suresh, “Simulation of blow molding using ansys polyflow,” APCBEE Procedia, vol. 5, pp. 468–473, 2013. View at Google Scholar
  13. J. Zimmer and M. Stommel, “Method for the evaluation of stretch blow molding simulations with free blow trials,” IOP Conference Series: Materials Science and Engineering, vol. 48, Article ID 012004, 2013. View at Publisher · View at Google Scholar
  14. N. Saad-Gouider, R. Estevez, C. Olagnon, and R. Séguéla, “Calibration of a viscoplastic cohesive zone for crazing in PMMA,” Engineering Fracture Mechanics, vol. 73, no. 16, pp. 2503–2522, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. H. Stachurski, “Strength and deformation of rigid polymers:the stress-strain curve in amorphous PMMA,” Polymer, vol. 44, no. 19, pp. 6067–6076, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Nasraoui, P. Forquin, L. Siad, and A. Rusinek, “Influence of strain rate, temperature and adiabatic heating on the mechanical behaviour of poly-methyl-methacrylate: experimental and modelling analyses,” Materials and Design, vol. 37, pp. 500–509, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Dong, R. J. T. Lin, and D. Bhattacharyya, “Determination of critical material parameters for numerical simulation of acrylic sheet forming,” Journal of Materials Science, vol. 40, no. 2, pp. 399–410, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Marckmann, E. Verron, and B. Peseux, “Finite element analysis of blow molding and thermoforming using a dynamic explicit procedure,” Polymer Engineering and Science, vol. 41, no. 3, pp. 426–439, 2001. View at Publisher · View at Google Scholar · View at Scopus