Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 259129, 16 pages
http://dx.doi.org/10.1155/2014/259129
Research Article

Material Removal Rate, Electrode Wear Rate, and Surface Roughness Evaluation in Die Sinking EDM with Hollow Tool through Response Surface Methodology

Department of Mechanical Engineering, M. M. University, Mullana, Ambala, Haryana 133203, India

Received 15 May 2014; Accepted 25 August 2014; Published 23 September 2014

Academic Editor: Gilles Dessein

Copyright © 2014 Teepu Sultan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Teepu Sultan, Anish Kumar, and Rahul Dev Gupta, “Material Removal Rate, Electrode Wear Rate, and Surface Roughness Evaluation in Die Sinking EDM with Hollow Tool through Response Surface Methodology,” International Journal of Manufacturing Engineering, vol. 2014, Article ID 259129, 16 pages, 2014. https://doi.org/10.1155/2014/259129.