Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 261349, 13 pages
http://dx.doi.org/10.1155/2014/261349
Research Article

Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel

1Department of Applied Engineering, Safety and Technology, Millersville University of Pennsylvania, Millersville, PA 17551, USA
2Department of Engineering Technology, University of North Texas, Denton, TX 76207, USA
3Department of Materials Science and Engineering, University of North Texas, Denton, TX 76207, USA

Received 8 November 2013; Revised 18 March 2014; Accepted 21 March 2014; Published 15 April 2014

Academic Editor: Gilles Dessein

Copyright © 2014 Vasim Shaikh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. U.S. Department of Health and Human Services, Occupational Exposure to Metal Working Fluid, 98-102, NIOSH Publication, 1998.
  2. E. O. Bennett and D. L. Bennett, “Occupational airway diseases in the metalworking industry. Part 1: respiratory infections, pneumonia, chronic bronchitis and emphysema,” Tribology International, vol. 18, no. 3, pp. 169–176, 1985. View at Publisher · View at Google Scholar · View at Scopus
  3. N. Boubekri and V. Shaikh, “Machining using minimum quantity lubrication: a technology for sustainability,” International Journal of Applied Science and Technology, vol. 2, pp. 111–115, 2012. View at Google Scholar
  4. K. Weinert, I. Inasaki, J. W. Sutherland, and T. Wakabayashi, “Dry machining and minimum quantity lubrication,” CIRP Annals—Manufacturing Technology, vol. 53, no. 2, pp. 511–537, 2004. View at Google Scholar · View at Scopus
  5. S. Zhang, J. F. Li, and Y. W. Wang, “Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions,” Journal of Cleaner Production, vol. 32, pp. 81–87, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. A. D. Jayal and A. K. Balaji, “Effects of cutting fluid application on tool wear in machining: interactions with tool-coatings and tool surface features,” Wear, vol. 267, no. 9-10, pp. 1723–1730, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Kurgin, G. Barber, and Q. Zou, “Cutting insert and work piece materials for minimum quantity lubrication,” in International Seminar on Modern Cutting and Measurement Engineering, vol. 7997 of Proceedings of the SPIE, pp. 1–10, Beijing, China, December 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. M. H. Sadeghi, M. J. Hadad, T. Tawakoli, A. Vesali, and M. Emami, “An investigation on surface grinding of AISI 4140 hardened steel using minimum quantity lubrication-MQL technique,” International Journal of Material Forming, vol. 3, no. 4, pp. 241–251, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. V. Shaikh and N. Boubekri, “Effects of minimum quantity lubrication in drilling 1018 steel,” Journal of Manufacturing Technology Research, vol. 1, pp. 1–14, 2010. View at Google Scholar
  10. A. Attanasio, M. Gelfi, C. Giardini, and C. Remino, “Minimal quantity lubrication in turning: effect on tool wear,” Wear, vol. 260, no. 3, pp. 333–338, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. A. K. Singh and A. K. Gupta, “Metalworking fluids from vegetable oils,” Journal of Synthetic Lubrication, vol. 23, no. 4, pp. 167–176, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. S. A. Lawal, I. A. Choudhury, and Y. Nukman, “Application of vegetable oil-based metalworking fluids in machining ferrous metals—a review,” International Journal of Machine Tools and Manufacture, vol. 52, no. 1, pp. 1–12, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Woods, “Going green,” Cutting Tool Engineering, vol. 57, no. 2, pp. 11–13, 2005. View at Google Scholar · View at Scopus
  14. W. R. Stott, “Environmentally friendly cutting fluids,” Gear Technology, vol. 22, no. 2, pp. 16–18, 2005. View at Google Scholar · View at Scopus
  15. J. R. Davis, ASM Metals Handbook, Machining, vol. 16, 19th edition, 1989.
  16. D. C. Montgomery, Design and Analysis of Experiments, John Wiley & Sons, New York, NY, USA, 5th edition, 2001.
  17. T. H. C. Childs, K. Maekawa, T. Obikawa, and Y. Yamane, Metal Machining, Theory and Applications, Oxford, UK, 2000.
  18. S. Min, I. Inasaki, S. Fujimura, T. Wakabayashi, and S. Suda, “Investigation of adsorption behaviour of lubricants in near-dry machining,” Proceedings of the Institution of Mechanical Engineers B: Journal of Engineering Manufacture, vol. 219, no. 9, pp. 665–671, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. D. P. Adler, W. W.-S. Hii, D. J. Michalek, and J. W. Sutherland, “Examining the role of cutting fluids in machining and efforts to address associated environmental/health concerns,” Machining Science and Technology, vol. 10, no. 1, pp. 23–58, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. S. M. Ali, N. R. Dhar, and S. K. Dey, “Effect of minimum quantity lubrication (MQL) on cutting performance in turning medium carbon steel by uncoated carbide insert at different speed-feed combinations,” Advances in Production Engineering & Management, vol. 6, pp. 185–198, 2011. View at Google Scholar
  21. M. Shaw, J. Pigott, and L. Richardson, “The effect of cutting fluid upon chip-tool interface temperature,” Transaction of ASME, vol. 73, pp. 45–56, 1951. View at Google Scholar
  22. H. Yanda, J. A. Ghani, M. N. A. M. Rodzi, K. Othman, and C. H. C. Haron, “Optimization of material removal rate, surface roughness and tool life on conventional dry turning of FCD700,” International Journal of Mechanical and Materials Engineering, vol. 5, no. 2, pp. 182–190, 2010. View at Google Scholar · View at Scopus
  23. N. R. Dhar, M. T. Ahmed, and S. Islam, “An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel,” International Journal of Machine Tools and Manufacture, vol. 47, no. 5, pp. 748–753, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. H. Caliskan, C. Kurbanoglu, P. Panjan, M. Cekad, and D. Kramar, “Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling,” Tribology International, vol. 62, pp. 215–222, 2013. View at Google Scholar
  25. R. Suresh, S. Basavarajappa, V. N. Gaitonde, and G. L. Samuel, “Machinability investigations on hardened AISI 4340 steel using coated carbide insert,” International Journal of Refractory Metals and Hard Materials, vol. 38, pp. 124–133, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. A. K. Sahoo and B. Sahoo, “Experimental investigations on machinability aspects in finish hard turning of AISI, 4340 steel using uncoated and multilayer coated carbide inserts,” Measurement, vol. 45, pp. 2153–2165, 2012. View at Google Scholar
  27. S. Kalpakjian, Manufacturing Engineering and Technology, Addison-Wesley Publishing Company, New York, NY, USA, 3rd edition, 1995.
  28. R. B. Da Silva, J. M. Vieira, R. N. Cardoso et al., “Tool wear analysis in milling of medium carbon steel with coated cemented carbide inserts using different machining lubrication/cooling systems,” Wear, vol. 271, no. 9-10, pp. 2459–2465, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. S. Dhiman, R. Sehgal, S. K. Sharma, and V. S. Sharma, “Machining behavior of AlSI 1018 steel during turning,” Journal of Scientific and Industrial Research, vol. 67, no. 5, pp. 355–360, 2008. View at Google Scholar · View at Scopus
  30. P. Kwon, “Predictive models for flank wear on coated inserts,” Journal of Tribology, vol. 122, no. 1, pp. 340–347, 2000. View at Publisher · View at Google Scholar · View at Scopus
  31. K. Abu-Shgair, M. Al-Hasan, A. K. Abdul Jawwad, A. Al-Bashir, H. H. Abu-Safe, and M. H. Gordon, “Characterizing (Ti, AI)N film coating produced by inverted cylindrical magnetron sputtering for metal machining applications,” Reviews on Advanced Materials Science, vol. 24, no. 1-2, pp. 48–55, 2010. View at Google Scholar · View at Scopus