Analyzing the Effectiveness of Microlubrication Using a Vegetable Oil-Based Metal Working Fluid during End Milling AISI 1018 Steel

Table 4

Comparison of experimental and predicted flank wear values.

Flank wear side	Cutting speed and feed rate combination	Experimental mean value (mm)	Predicted value (mm)	% error
1	24 m/min and 0.15 mm/rev	0.43	0.42	+2.3
	36 m/min and 0.25 mm/rev	0.44	0.45	−2.2
2	24 m/min and 0.15 mm/rev	0.46	0.43	+6.9
	36 m/min and 0.25 mm/rev	0.34	0.34	0.0