Table of Contents
International Journal of Manufacturing Engineering
Volume 2014 (2014), Article ID 291564, 8 pages
http://dx.doi.org/10.1155/2014/291564
Research Article

Modeling of Tool Wear in Vibration Assisted Nano Impact-Machining by Loose Abrasives

Department of Mechanical and Materials Engineering, University of Cincinnati, Cincinnati, OH 45221, USA

Received 17 May 2014; Accepted 9 September 2014; Published 20 October 2014

Academic Editor: Tuğrul Özel

Copyright © 2014 Sagil James and Murali M. Sundaram. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Sagil James and Murali M. Sundaram, “Modeling of Tool Wear in Vibration Assisted Nano Impact-Machining by Loose Abrasives,” International Journal of Manufacturing Engineering, vol. 2014, Article ID 291564, 8 pages, 2014. doi:10.1155/2014/291564