Table of Contents
International Journal of Manufacturing Engineering
Volume 2014 (2014), Article ID 385065, 15 pages
Research Article

Failure Prediction in Bulk Metal Forming Process

Department of Mechanical Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia

Received 25 August 2014; Accepted 13 October 2014; Published 10 November 2014

Academic Editor: Hailiang Yu

Copyright © 2014 Ameen Topa and Qasim H. Shah. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ameen Topa and Qasim H. Shah, “Failure Prediction in Bulk Metal Forming Process,” International Journal of Manufacturing Engineering, vol. 2014, Article ID 385065, 15 pages, 2014. doi:10.1155/2014/385065