Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 439634, 8 pages
http://dx.doi.org/10.1155/2014/439634
Research Article

Cutting Forces in Milling of Carbon Fibre Reinforced Plastics

Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, 03043 Cassino, Italy

Received 9 July 2014; Revised 16 October 2014; Accepted 17 October 2014; Published 13 November 2014

Academic Editor: Thomas R. Kurfess

Copyright © 2014 Luca Sorrentino and Sandro Turchetta. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [2 citations]

The following is the list of published articles that have cited the current article.

  • Eckart Uhlmann, Sebastian Richarz, Fiona Sammler, and Ralph Hufschmied, “High Speed Cutting of Carbon Fibre Reinforced Plastics,” Procedia Manufacturing, vol. 6, pp. 113–123, 2016. View at Publisher · View at Google Scholar
  • Christian Moeller, Hans Christian Schmidt, Philip Koch, Christian Boehlmann, Simon Kothe, Jörg Wollnack, and Wolfgang Hintze, “Real Time Pose Control of an Industrial Robotic System for Machining of Large Scale Components in Aerospace Industry Using Laser Tracker System,” SAE International Journal of Aerospace, vol. 10, no. 2, 2017. View at Publisher · View at Google Scholar