Table of Contents
International Journal of Manufacturing Engineering
Volume 2014 (2014), Article ID 439634, 8 pages
Research Article

Cutting Forces in Milling of Carbon Fibre Reinforced Plastics

Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, 03043 Cassino, Italy

Received 9 July 2014; Revised 16 October 2014; Accepted 17 October 2014; Published 13 November 2014

Academic Editor: Thomas R. Kurfess

Copyright © 2014 Luca Sorrentino and Sandro Turchetta. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Luca Sorrentino and Sandro Turchetta, “Cutting Forces in Milling of Carbon Fibre Reinforced Plastics,” International Journal of Manufacturing Engineering, vol. 2014, Article ID 439634, 8 pages, 2014. doi:10.1155/2014/439634