Research Article
Cutting Forces in Milling of Carbon Fibre Reinforced Plastics
Table 1
Experimental plan.
| Factors | Levels | Value |
| , axial cutting depth mm | 4 | 1.0-1.5-2.0-3.0 | , radial cutting depth mm | 1 | 25 | , cutting speed m/min | 3 | 100-200-300 | , feed per tooth mm | 2 | 0.022-0.044 |
| Replications | 3 | ā | Total cuts | 72 | ā |
|
|