Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 596128, 12 pages
http://dx.doi.org/10.1155/2014/596128
Research Article

Enhancing Multistage Deep-Drawing and Ironing Manufacturing Processes of Axisymmetric Components: Analysis and Experimentation

1EXPAL Systems, Avenida Partenón 16, 28042 Madrid, Spain
2School of Industrial Engineering, University of Castilla-La Mancha, Albacete, Spain
3School of Industrial Engineering, UNED, 28042 Madrid, Spain
4School of Engineering, Cardiff University, Cardiff, UK

Received 7 February 2014; Accepted 4 May 2014; Published 29 May 2014

Academic Editor: Jean-Yves Hascoet

Copyright © 2014 F. Javier Ramírez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

F. Javier Ramírez, Rosario Domingo, Michael S. Packianather, and Miguel A. Sebastian, “Enhancing Multistage Deep-Drawing and Ironing Manufacturing Processes of Axisymmetric Components: Analysis and Experimentation,” International Journal of Manufacturing Engineering, vol. 2014, Article ID 596128, 12 pages, 2014. https://doi.org/10.1155/2014/596128.