Table of Contents
International Journal of Manufacturing Engineering
Volume 2014, Article ID 598531, 13 pages
http://dx.doi.org/10.1155/2014/598531
Research Article

Characterization and Optimization of Mechanical Properties of ABS Parts Manufactured by the Fused Deposition Modelling Process

School of Mechanical and Electrical Engineering & Technology, Faculty of Applied Science and Technology, Sheridan Institute of Technology and Advanced Learning, Brampton, ON, Canada L6Y 5H9

Received 7 July 2014; Accepted 10 October 2014; Published 10 November 2014

Academic Editor: Luigino Filice

Copyright © 2014 Godfrey C. Onwubolu and Farzad Rayegani. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Godfrey C. Onwubolu and Farzad Rayegani, “Characterization and Optimization of Mechanical Properties of ABS Parts Manufactured by the Fused Deposition Modelling Process,” International Journal of Manufacturing Engineering, vol. 2014, Article ID 598531, 13 pages, 2014. https://doi.org/10.1155/2014/598531.