Characterization and Optimization of Mechanical Properties of ABS Parts Manufactured by the Fused Deposition Modelling Process

Table 3

Input process parameters that affect output responses.

Run	layer thickness	part orientation	raster angle	raster width	air gap	Measured (MPa)	Predicted (MPa)
1	0.127	0	0	0.2032	−0.00254	32.56	27.76
2	0.127	0	0	0.2032	0.5588	6.52	4.74
3	0.127	0	0	0.5588	−0.00254	24.81	28.14
4	0.127	0	0	0.5588	0.5588	10.44	8.58
5	0.127	0	45	0.2032	−0.00254	34.61	30.96
6	0.127	0	45	0.2032	0.5588	4.78	4.39
7	0.127	0	45	0.5588	−0.00254	30.15	31.96
8	0.127	0	45	0.5588	0.5588	8.08	8.84
9	0.127	90	0	0.2032	−0.00254	12.86	12.60
10	0.127	90	0	0.2032	0.5588	4.39	5.10
11	0.127	90	0	0.5588	−0.00254	23.55	23.89
12	0.127	90	0	0.5588	0.5588	9.56	8.58
13	0.127	90	45	0.2032	−0.00254	15.1	14.33
14	0.127	90	45	0.2032	0.5588	4.01	4.96
15	0.127	90	45	0.5588	−0.00254	24.3	26.67
16	0.127	90	45	0.5588	0.5588	8.09	8.78
17	0.3302	0	0	0.4572	−0.00254	31.46	28.32
18	0.3302	0	0	0.4572	0.9652	8.43	9.19
19	0.3302	0	0	0.9652	−0.00254	24.99	25.85
20	0.3302	0	0	0.9652	0.9652	9.39	11.35
21	0.3302	0	45	0.4572	−0.00254	31.42	32.05
22	0.3302	0	45	0.4572	0.9652	7.12	9.06
23	0.3302	0	45	0.9652	−0.00254	28.94	29.42
24	0.3302	0	45	0.9652	0.9652	11.07	10.96
25	0.3302	90	0	0.4572	−0.00254	20.55	22.30
26	0.3302	90	0	0.4572	0.9652	8.89	8.64
27	0.3302	90	0	0.9652	−0.00254	24.72	25.14
28	0.3302	90	0	0.9652	0.9652	11.28	10.53
29	0.3302	90	45	0.4572	−0.00254	24.96	24.92
30	0.3302	90	45	0.4572	0.9652	8.82	8.58
31	0.3302	90	45	0.9652	−0.00254	27.35	27.85
32	0.3302	90	45	0.9652	0.9652	11.63	10.34