Research Article
Characterization and Optimization of Mechanical Properties of ABS Parts Manufactured by the Fused Deposition Modelling Process
Table 5
Optimal cutting parameters from DE.
| Tensile strength | MPa | 32.76 | Layer thickness () | in./mm | 0.01′′/0.2778 | Part orientation () | Degree | 9.05° | Raster angle () | Degree | 45° | Raster width () | in./mm | 0.022′′/(0.5588) | Air gap () | in./mm | 0.0001′′/(0.0025) |
|
|