Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2013, Article ID 315917, 6 pages
http://dx.doi.org/10.1155/2013/315917
Research Article

Preparation of Higher Molecular Weight Poly (L-lactic Acid) by Chain Extension

Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao 266042, China

Received 7 June 2013; Accepted 18 July 2013

Academic Editor: Zhou Yang

Copyright © 2013 Chenguang Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [10 citations]

The following is the list of published articles that have cited the current article.

  • Anuar, Tan, and Ahmad, “Synthesis and characterization of polylactide-poly(ethylene glycol) block copolymer as solid polymer electrolyte,” Asian Journal of Chemistry, vol. 26, pp. S230–S236, 2014. View at Publisher · View at Google Scholar
  • Hesam Ghasemi, Fatma Mahrous, Amin Mirzadeh, and Musa R. Kamal, “Reactive extrusion effects on rheological and mechanical properties of poly(lactic acid)/poly[(butylene succinate)-co-adipate]/epoxy chain extender blends and clay nanocomposites,” Journal of Applied Polymer Science, vol. 132, no. 48, 2015. View at Publisher · View at Google Scholar
  • Jae Choon Lee, Jung Heun Moon, Jae-Hoon Jeong, Bo Mi Kim, Myeon-Cheon Choi, Jung Rae Kim, Mi Yeon Kim, and Chang-Sik Ha, “Biodegradability of poly(lactic acid) (PLA)/lactic acid (LA) blends using anaerobic digester sludge,” Macromolecular Research, vol. 24, no. 8, pp. 741–747, 2016. View at Publisher · View at Google Scholar
  • Bahram Khan, Muhammad Bilal Khan Niazi, Ghufrana Samin, and Zaib Jahan, “Thermoplastic Starch: A Possible Biodegradable Food Packaging Material-A Review,” Journal of Food Process Engineering, vol. 40, no. 3, pp. e12447, 2016. View at Publisher · View at Google Scholar
  • Tan, Ahmad, and Anuar, “Investigation of the synthesis of poly-D,L-lactide-co-poly(ethylene glycol) flexible thermoplastic,” International Journal of Polymer Analysis and Characterization, vol. 21, no. 2, pp. 104–111, 2016. View at Publisher · View at Google Scholar
  • Florjańczyk, Frydrych, Charazińska, and Kąkol, “Biodegradable polyesters based on star-shaped lactic acid oligomers,” Polymer Degradation and Stability, vol. 132, pp. 202–212, 2016. View at Publisher · View at Google Scholar
  • Ya Li, and Weijun Zhen, “Preparation and Performance of Poly (Lactic Acid)-γ-Cyclodextrin Inclusion Complex-Poly (Lactic Acid) Multi-Branched Polymers by the Reactive Extrusion Process,” Polymer-Plastics Technology and Engineering, 2017. View at Publisher · View at Google Scholar
  • Yohanes Windu Widhianto, Masaki Yamamoto, Kazunari Masutani, Yoshiharu Kimura, and Hideki Yamane, “Thermal properties of the multi-stereo block poly(lactic acid)s with various block lengths,” Polymer Degradation and Stability, 2017. View at Publisher · View at Google Scholar
  • Vida Montazeri Davoodi, Zahed Ahmadi, and Faramarz Afshar Taromi, “A journey across the solid state polymerization to assess the role of critical factors influencing the molecular weight of polylactic acid,” Journal of Vinyl and Additive Technology, 2018. View at Publisher · View at Google Scholar
  • Omid Yousefzade, Lourdes Franco, Mahsa Nami, Jordi Puiggali, and Hamid Garmabi, “ Nanocomposites based on chain extended poly( l -lactic acid)/carboxylated carbon nanotubes: Crystallization kinetics and lamellar morphology ,” Journal of Composite Materials, pp. 002199831882272, 2019. View at Publisher · View at Google Scholar