International Journal of Polymer Science

Table of Contents

Table of Contents: 2013

  • International Journal of Polymer Science -
  • Special Issue
  • - Volume 2013
  • - Article ID 435073
  • - Research Article

Potential of Cellulose-Based Superabsorbent Hydrogels as Water Reservoir in Agriculture

C. Demitri | F. Scalera | ... | A. Maffezzoli
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 610132
  • - Research Article

A Novel Continuous Extrusion Process to Fabricate Wedge-Shaped Light Guide Plates

Wen-Tse Hsiao | Jui-Chang Lin | ... | Yung-Sheng Lin
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 312615
  • - Research Article

Novel Composite Materials for Chiral Separation from Cellulose and Barium Sulfate

Wei Chen | Zhaoqun Wang | ... | Zheng-Wu Bai
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 842894
  • - Research Article

The Effect of H-Bonding on Radical Copolymerization of Maleic Anhydride with N-tert-Butylacrylamide and Its Characterization

Ahmet Okudan | Ayşe Karasakal
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 493147
  • - Research Article

Improved Performance of an Epoxy Matrix as a Result of Combining Graphene Oxide and Reduced Graphene

L. Ramos-Galicia | L. N. Mendez | ... | C. Velasco-Santos
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 104502
  • - Research Article

Application of Box-Behnken Design in Optimization of Glucose Production from Oil Palm Empty Fruit Bunch Cellulose

Satriani Aga Pasma | Rusli Daik | ... | Osman Hassan
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 357963
  • - Research Article

Overmodulation Control in the Optimization of a H-PDLC Device with Ethyl Eosin as Dye

Manuel Ortuño | Marina Riquelme | ... | Augusto Beléndez
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 797452
  • - Research Article

Oil Palm Mesocarp Fiber as New Lignocellulosic Material for Fabrication of Polymer/Fiber Biocomposites

Yoon Yee Then | Nor Azowa Ibrahim | ... | Wan Md Zin Wan Yunus
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 903806
  • - Research Article

Preparation of Conductive PANI/PVA Composites via an Emulsion Route

Xiang-Qin Wang | Bin-Jie Xin | Jian Xu
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 797109
  • - Research Article

Effect of Clay Addition on Mechanical Properties of Unsaturated Polyester/Glass Fiber Composites

Kusmono | Zainal Arifin Mohd Ishak
  • International Journal of Polymer Science -
  • Special Issue
  • - Volume 2013
  • - Article ID 867934
  • - Research Article

Preparation of Polyaniline-Doped Fullerene Whiskers

Bingzhe Wang | Xin Gao | Guangzhe Piao
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 364253
  • - Research Article

Interaction of Green Polymer Blend of Modified Sodium Alginate and Carboxylmethyl Cellulose Encapsulation of Turmeric Extract

Sa-Ad Riyajan | Janthanipa Nuim
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 156289
  • - Research Article

Synthesis and Characterizations of Poly(trimethylene terephthalate)-b-poly(tetramethylene glycol) Copolymers

Feng Liu | Meng Yao | Ming-tao Run
  • International Journal of Polymer Science -
  • Special Issue
  • - Volume 2013
  • - Article ID 460898
  • - Editorial

Polymeric Membrane Science and Technology

Hai-Yin Yu | Ling-Shu Wan | Qian Yang
  • International Journal of Polymer Science -
  • Special Issue
  • Volume 2013
  • - Article ID 925235
  • - Research Article

Biphasic Equilibrium Dialysis of Poly(N-Isopropyl Acrylamide) Nanogels Synthesized at Decreased Temperatures for Targeted Delivery of Thermosensitive Bioactives

Witold Musial | Jiri Michálek | ... | Martin Pradny
International Journal of Polymer Science
 Journal metrics
Acceptance rate36%
Submission to final decision63 days
Acceptance to publication34 days
CiteScore1.580
Impact Factor1.892
 Submit

We are committed to sharing findings related to COVID-19 as quickly and safely as possible. Any author submitting a COVID-19 paper should notify us at help@hindawi.com to ensure their research is fast-tracked and made available on a preprint server as soon as possible. We will be providing unlimited waivers of publication charges for accepted articles related to COVID-19.