Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2013 (2013), Article ID 514951, 8 pages
http://dx.doi.org/10.1155/2013/514951
Research Article

Manufacture of Partially Biodegradable Composite Materials Based on PLA-Tires Powder: Process and Characterization

1Centro de Investigación Científica de Yucatán, Unidad de Materiales, Calle 43, No. 130, Colonia Chuburná de Hidalgo, CP 97200 Mérida, YUC, Mexico
2Tokyo Metropolitan University, Mechanical Engineering Department, 1-1 Minami-Ohsawa, Hachioji-shi, Tokyo 192-0397, Japan
3Instituto Tecnológico Superior de Calkiní en el Estado de Campeche, Avenida Ah Canul SN por Carretera Federal, CP 24900 Calkiní, CAM, Mexico

Received 21 February 2013; Accepted 16 April 2013

Academic Editor: Osman Gencel

Copyright © 2013 Carlos Rolando Rios-Soberanis et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Carlos Rolando Rios-Soberanis, Shuchi Wakayama, Takenobo Sakai, José de los Ángeles Rodriguez-Laviada, and Emilio Pérez-Pacheco, “Manufacture of Partially Biodegradable Composite Materials Based on PLA-Tires Powder: Process and Characterization,” International Journal of Polymer Science, vol. 2013, Article ID 514951, 8 pages, 2013. doi:10.1155/2013/514951