Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 6, Issue 4, Pages 253-263
http://dx.doi.org/10.1155/S1023621X00000245

Influence of the Gap Size Between Side Walls and Ribs on the Heat Transfer in a Stationary and Rotating Straight Rib-roughened Duct

Department of Mechanical Systems Engineering, College of Engineering, Tokyo University of Agriculture & Technology, Koganei-shi, Tokyo 184, Japan

Received 2 April 1998; Revised 15 October 1998

Copyright © 2000 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

R. Kiml, S. Mochizuki, and A. Murata, “Influence of the Gap Size Between Side Walls and Ribs on the Heat Transfer in a Stationary and Rotating Straight Rib-roughened Duct,” International Journal of Rotating Machinery, vol. 6, no. 4, pp. 253-263, 2000. https://doi.org/10.1155/S1023621X00000245.