International Journal of Rotating Machinery

Table of Contents: 2000

  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 583781

On the Role of Nonsynchronous Rotating Damping in Rotordynamics

Giancarlo Genta | Eugenio Brusa
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 242765

Parametric Identification of a Dynamic Foundation Model of a Rotary Machine Using Response Data Due to Unknown Unbalances

Uwe Prells | Arthur W. Lees
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 627640

Aeroelastic Vibrations and Stability in Cyclic Symmetric Domains

Bernard Lalanne | Maurice Touratier
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 802461

Three-Dimensional Thermo Fluid Analysis of Large Scale Electric Motor

Debasish Biswas | Masaru Ishizuka | Hideo Iwasaki
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 595983

Laser Velocimeter Measurements in the Stator of an Automotive Torque Converter

Steven B. Ainley | Ronald D. Flack
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 296573

Periodic Unsteady Flow Aerodynamics and Heat Transfer: Studies on a Curved Surface, Combined Part I and II

M. T. Schobeiri | L. Wright | P. Chakka
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 453050

Experimental Study on Active Control of Surge in a Centrifugal Compression System

Nie Chaoqun | Chen Jingyi | Chen Naixing
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 385304

Comparison of Various Turbulence Models in Rotating Machinery Blade-to-Blade Passages

E. Y. K. Ng | S. T. Tan
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 285109

Rotating Machinery Predictive Maintenance Through Expert System

M. Sarath Kumar | B. S. Prabhu
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 964032

Impulse Turbine with Self-pitch-controlled Guide Vanes for Wave Power Conversion (Effect of Guide Vane Geometry on the Performance)

M. Takao | Y. Kinoue | ... | K. Kaneko
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 275015

Numerical Simulation of Nonlinear Oil Film Forces of Tilting-Pad Guide Bearing in Large Hydro-unit

Li-Feng Ma | Xin-Zhi Zhang
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 452064

Numerical Analysis of Dynamic Properties of Nonlinear Rotor Systems of Aircraft Jet Engines

Ján Kamenický | Eduard Malenovský | Jaroslav Zapomel
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 483957

Investigation of Factors Influencing the Structural Vibration in Ball Bearings

Kapil Mehra | Kambiz Farhang | Jayanta Datta
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 438489

Turbine Airfoil Leading Edge Film Cooling Bibliography: 1972–1998

D. M. Kercher
  • International Journal of Rotating Machinery -
  • Special Issue
  • Volume 6
  • - Article ID 496143

Bifurcation Behavior of a Flexible Rotor Supported on Nonlinear Squeeze Film Dampers without Centralized Springs

Zhu Changsheng | Heinz Ulbrich
International Journal of Rotating Machinery
 Journal metrics
Acceptance rate27%
Submission to final decision75 days
Acceptance to publication42 days
CiteScore2.100
Impact Factor-
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.