Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2007, Article ID 17289, 10 pages
http://dx.doi.org/10.1155/2007/17289
Review Article

Mistuning Identification and Model Updating of an Industrial Blisk

1Laboratoire de Tribologie et Dynamique des Systèmes, Équipe Dynamique des Structures et des Systèmes, École Centrale de Lyon, 36 avenue Guy de Collongue, Ecully Cedex 69134, France
2Snecma (Safran group), Moissy-Cramayel 77550, France

Received 16 February 2006; Revised 6 December 2006; Accepted 6 December 2006

Academic Editor: Agnes Muszynska

Copyright © 2007 D. Laxalde et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. V. Srinivasan, “Flutter and resonant vibration characteristics of engine blades,” Journal of Engineering for Gas Turbines and Power, vol. 119, no. 4, pp. 742–775, 1997.
  2. S.-T. Wei and C. Pierre, “Localization phenomena in mistuned assemblies with cyclic symmetry—part I: free vibrations,” Journal of Vibration, Acoustics, Stress, and Reliability in Design, vol. 110, no. 4, pp. 429–438, 1988.
  3. S.-T. Wei and C. Pierre, “Localization phenomena in mistuned assemblies with cyclic symmetry—part II: forced vibrations,” Journal of Vibration, Acoustics, Stress, and Reliability in Design, vol. 110, no. 4, pp. 439–449, 1988.
  4. M. P. Castanier, G. Óttarsson, and C. Pierre, “A reduced order modeling technique for mistuned bladed disks,” Journal of Vibration and Acoustics, vol. 119, no. 3, pp. 439–447, 1997.
  5. M.-T. Yang and J. H. Griffin, “A reduced-order model of mistuning using a subset of nominal system modes,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 4, pp. 893–900, 2001. View at Publisher · View at Google Scholar
  6. E. Seinturier, C. Dupont, M. Berthillier, and M. Dumas, “A new method to predict flutter in presence of structural mistuning,” in Proceedings of the 9th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines (ISUAAAT '00), Lyon, France, September 2000.
  7. R. Bladh, M. P. Castanier, and C. Pierre, “Component-mode-based reduced order modeling techniques for mistuned bladed disks—part 1: theoretical models,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 1, pp. 89–99, 2001. View at Publisher · View at Google Scholar
  8. D.-M. Tran, “Component mode synthesis methods using interface modes. Application to structures with cyclic symmetry,” Computers & Structures, vol. 79, no. 2, pp. 209–222, 2001. View at Publisher · View at Google Scholar
  9. J. H. Griffin and T. M. Hoosac, “Model development and statistical investigation of turbine blade mistuning,” Journal of Vibration, Acoustics, Stress, and Reliability in Design, vol. 106, no. 2, pp. 204–210, 1984.
  10. A. Sinha, “Calculating the statistics of forced response of a mistuned bladed disk assembly,” AIAA Journal, vol. 24, no. 11, pp. 1797–1801, 1986.
  11. J. Judge, C. Pierre, and O. Mehmed, “Experimental investigation of mode localization and forced response amplitude magnification for a mistuned bladed disk,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 4, pp. 940–950, 2001. View at Publisher · View at Google Scholar
  12. J. Judge, C. Pierre, and S. L. Ceccio, “Mistuning identification in bladed disks,” in Proceedings of the International Conference on Structural Dynamics Modeling, Madeira Island, Portugal, 2002.
  13. D. M. Feiner and J. H. Griffin, “Mistuning identification of bladed disks using a fundamental mistuning model—part I: theory,” Journal of Turbomachinery, vol. 126, no. 1, pp. 150–158, 2004. View at Publisher · View at Google Scholar
  14. D. M. Feiner and J. H. Griffin, “Mistuning identification of bladed disks using a fundamental mistuning model—part II: application,” Journal of Turbomachinery, vol. 126, no. 1, pp. 159–165, 2004. View at Publisher · View at Google Scholar
  15. F. Pichot, F. Thouverez, L. Jézéquel, and E. Seinturier, “Mistuning parameters identification of a bladed disk,” Key Engineering Materials, vol. 204, no. 2, pp. 123–132, 2001.
  16. T. W. Lim and T. A. L. Kashangaki, “Structural damage detection of space truss structures using best achievable eigenvectors,” AIAA Journal, vol. 32, no. 5, pp. 1049–1057, 1994.
  17. T. W. Lim, “Structural damage detection using constrained eigenstructure assignment,” Journal of Guidance, Control, and Dynamics, vol. 18, no. 3, pp. 411–418, 1995.
  18. F. Pichot, D. Laxalde, J.-J. Sinou, F. Thouverez, and J.-P. Lombard, “Mistuning identification for industrial blisks based on the best achievable eigenvector,” Computers & Structures, vol. 84, no. 29-30, pp. 2033–2049, 2006. View at Publisher · View at Google Scholar
  19. R. Bladh, M. P. Castanier, and C. Pierre, “Component-mode-based reduced order modeling techniques for mistuned bladed disks—part 2: application,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 1, pp. 100–108, 2001. View at Publisher · View at Google Scholar
  20. W. A. Benfield and R. F. Hruda, “Vibration analysis of structures by component mode substitution,” AIAA Journal, vol. 9, no. 7, pp. 1255–1261, 1971.
  21. R. R. Craig and M. C. C. Bampton, “Coupling of substructures for dynamical analysis,” AIAA Journal, vol. 6, no. 7, pp. 1313–1319, 1968.
  22. M. P. Mignolet, A. J. Rivas-Guerra, and J. P. Delor, “Identification of mistuning characteristics of bladed disks from free response data—part 1,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 2, pp. 395–403, 2001. View at Publisher · View at Google Scholar
  23. F. Pichot, Identification du désaccordage des disques aubages monoblocs, Ph.D. thesis, École Centrale de Lyon, Lyon, France, 2002.
  24. D. M. Feiner, J. H. Griffin, K. W. Jones, J. A. Kenyon, O. Mehmed, and A. P. Kurkov, “System identification of mistuned bladed disks from traveling wave response measurements,” in Proceedings of the ASME Design Engineering Technical Conferences (DETC '03), vol. 5 B, pp. 1231–1240, Chicago, Ill, USA, September 2003.
  25. J. A. Judge, S. L. Ceccio, and C. Pierre, “Traveling-wave excitation and optical measurement techniques for non-contacting investigation of bladed disk dynamics,” The Shock and Vibration Digest, vol. 35, no. 3, pp. 183–190, 2003. View at Publisher · View at Google Scholar
  26. S. H. Lim, C. Pierre, and M. P. Castanier, “Mistuning identification and reduced-order model updating for bladed disks based on a component mode mistuning technique,” in Proceedings of the 9th National Turbine Engine High Cycle Fatigue Conference, Pinehurst, NC, USA, March 2004.
  27. D. M. Feiner and J. H. Griffin, “A completely experimental method of mistuning identification in integrally bladed rotors,” in Proceedings of the 8th National Turbine Engine High Cycle Fatigue Conference, Monterey, Calif, USA, April 2003.