Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2007, Article ID 76476, 10 pages
http://dx.doi.org/10.1155/2007/76476
Research Article

Analysis of Geometries' Effects on Rotating Stall in Vaneless Diffuser with Wavelet Neural Networks

Key Lab of Power Machinery and Engineering of Ministry Education, Shanghai Jiao Tong University, Shanghai 200030, China

Received 17 September 2007; Accepted 28 November 2007

Academic Editor: Yoshinobu Tsujimoto

Copyright © 2007 Chuang Gao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Senoo and Y. Kinoshita, “Limits of rotating stall and stall in vaneless diffuser of centrifugal compressors,” 1978, ASME Paper No. 78-GT-19.
  2. M. V. Ötügen, R. M. C. So, and B. C. Hwang, “Diffuser stall and rotating zones of separated boundary layer,” Experiments in Fluids, vol. 6, no. 8, pp. 521–533, 1988. View at Publisher · View at Google Scholar
  3. W. Jansen, “Steady fluid flow in a radial vaneless diffuser,” Journal of Basic Engineering, vol. 86, pp. 607–619, 1964.
  4. W. Jansen, “Rotating stall in a radial vaneless diffuser,” Journal of Basic Engineering, vol. 86, pp. 750–758, 1964.
  5. Y. Senoo, Y. Kinoshita, and M. Ishida, “Asymmetric flow in vaneless diffusers of centrifugal blowers,” Journal of Fluid Mechanics, vol. 99, no. 1, pp. 104–113, 1977.
  6. Y. Senoo and Y. Kinoshita, “Influence of inlet flow conditions and geometries of centrifugal vaneless diffusers on critical flow angle for reverse flow,” Journal of Fluid Mechanics, vol. 99, no. 1, pp. 98–103, 1977.
  7. P. Frigne and R. Van den Braembussche, “A theoretical model for rotating stall in the vaneless diffuser of a centrifugal compressor,” Journal of Engineering for Gas Turbines and Power, vol. 107, no. 2, pp. 507–513, 1985.
  8. Y. Tsujimoto, Y. Yoshida, and Y. Mori, “Study of vaneless diffuser rotating stall based on two-dimensional inviscid flow analysis,” Journal of Fluids Engineering, vol. 118, no. 1, pp. 123–127, 1996.
  9. H.-S. Dou and S. Mizuki, “Analysis of the flow in vaneless diffusers with large width-to-radius ratios,” Journal of Turbomachinery, vol. 120, no. 1, pp. 193–201, 1998.
  10. S. Ljevar, H. C. de Lange, and A. A. van Steenhoven, “Two-dimensional rotating stall analysis in a wide vaneless diffuser,” International Journal of Rotating Machinery, vol. 2006, Article ID 56420, 11 pages, 2006. View at Publisher · View at Google Scholar
  11. A. N. Adelhamid, W. H. Colwill, and J. F. Barrows, “Experimental investigation of unsteady phenomena in vaneless radial diffusers,” Journal of Engineering for Power, vol. 101, no. 1, pp. 52–60, 1979.
  12. A. N. Abdelhamid and J. Bertrand, “Distinction between two types of self-excited gas oscillations in vaneless radial diffusers,” Canadian Aeronautics and Space Journal, vol. 26, no. 2, pp. 105–117, 1980.
  13. A. N. Abdelhamid, “Effects of vaneless diffuser geometry on flow instability in centrifugal compression systems,” Canadian Aeronautics and Space Journal, vol. 29, no. 2, pp. 259–266, 1983.
  14. K. B. Abidogun, “Effects of vaneless diffuser geometries on rotating stall,” Journal of Propulsion and Power, vol. 22, no. 3, pp. 542–549, 2006.
  15. P. Frigne and R. Van den Braembussche, “Distinction between different types of impeller and diffuser rotating stall in a centrifugal compressor with vaneless diffuser,” Journal of Engineering for Gas Turbines and Power, vol. 106, no. 2, pp. 468–474, 1984.
  16. R. Van den Braembussche and P. Frigne, “Rotating non uniform flow in radial compressors,” in Proceedings of Centrifugal Compressors, Flow Phenomena and Performance (AGARD CP-282-12), Brussels, Belgium, May 1980.
  17. Y. H. Shin, K. H. Kim, and B. J. Son, “An experimental study on the development of a reverse flow zone in a vaneless diffuser,” JSME International Journal Series B, vol. 41, no. 3, pp. 546–555, 1998.
  18. H. Nishida and H. Kobayshi, “A study on the rotating stall of centrifugal compressors (1st report, effect of vaneless diffuser width on rotating stall),” Transactions of the JSME, Series B, vol. 54, no. 499, pp. 589–594, 1988.
  19. H. Kobayshi and H. Nishida, “A study on the rotating stall of sentrifugal compressors (2nd report, effect of vaneless diffuser inlet shape on rotating stall),” Transactions of the JSME, Series B, vol. 56, no. 529, pp. 98–103, 1990.
  20. N. Kammer and M. Rautenberg, “A Distinction Between Different Types of Stall in Centrifugal Compressor Stage,” Journal of Engineering for Gas Turbines and Power, vol. 108, no. 2, pp. 83–92, 1986.
  21. G. Ferrara, L. Ferrari, L. Baldassarre, C. P. Mengoni, and M. De Lucia, “Experimental investigation and characterization of the rotating stall in a high pressure centrifugal compressor, part I: influence of diffuser geometry on stall inception,” in Proceedings of the ASME Turbo Expo: Turbomachinery, vol. 5, pp. 613–620, Amsterdam, The Netherlands, June 2002.
  22. A. Cellai, G. Ferrara, L. Ferrari, C. P. Mengoni, and L. Baldassarre, “Experimental investigation and characterization of the rotating stall in a high pressure centrifugal compressor, part IV: impeller influence on diffuser stability,” in Proceedings of the ASME Turbo Expo, vol. 6, pp. 721–728, Atlanta, Ga, USA, June 2003.
  23. Y. Kinoshita and Y. Senoo, “Rotating stall induced in vaneless diffusers of very low specific speed centrifugal blowers,” Journal of Engineering for Gas Turbines and Power, vol. 107, no. 2, pp. 514–521, 1985.
  24. H. S. Dou, “Investigation of the prediction of losses in radial vaneless diffusers,” in Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition, p. 7, Orlando, Fla, USA, June 1991.
  25. H. Tsurusaki, K. Imaichi, and R. Miyake, “A Study on the rotating stall in vaneless diffusers of centrifugal fans. (1st report, rotational speeds of stall cells, critical inlet flow angle),” JSME International Journal, vol. 30, no. 260, pp. 279–287, 1987.
  26. D. Ji, G. Chuangang, and M. Yongmiao, “Temperature rise during deep surge in centrifugal compression system,” in Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition (Paper), p. 11, Houston, Tex, USA, June 1995.
  27. Q. Zhang and A. Benveniste, “Wavelet networks,” IEEE Transactions Neural Network, vol. 3, no. 6, pp. 889–898, 1992. View at Publisher · View at Google Scholar · View at PubMed
  28. I. Daubechies, Ten Lectures on Wavelet, CBMS, SIAM, Philadelphia, Pa, USA, 1992.
  29. N. B. Karayiannis and A. N. Venetsanopoulos, “Fast learning algorithms for neural networks,” IEEE Transaction on Circuits and Systems II, vol. 39, no. 7, pp. 453–474, 1992. View at Publisher · View at Google Scholar