Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2008, Article ID 354020, 6 pages
Research Article

Cavitation in Single-Vane Sewage Pumps

1Department of Fluiddynamics - Fluidmechanic in Machines and Systems, Technical University Berlin, Straße des 17. Juni 135, Sekr. K2, 10623 Berlin, Germany
2KSB Aktiengesellschaft, Turmstraße 92, 06110 Halle, Germany
3KSB Aktiengesellschaft, Johann-Klein Straße 9, 67227 Frankenthal, Germany

Received 22 April 2008; Accepted 28 October 2008

Academic Editor: Wei Tong

Copyright © 2008 P. U. Thamsen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Radke, S. Bross, T. Pensler, and P. Springer, “Einfluss der Laufradgeometrie auf Betriebssicherheit und Lebenszykluskosten von Abwasserpumpen,” Technik kompakt (KSB-Broschüre), 4. Ausgabe, June 2001.
  2. W. Kröber, “Auswahlkriterien für abwasserpumpen,” in Proceeding of Pump Users International Forum, Karlsruhe, Germany, October 2000.
  3. DIN 1184, Teil 3: Schöpfwerke/ Pumpwerke ohne Rechen, Richtlinien für die Planung, Beuth, Berlin, Germany, 1992.
  4. EUROPUMP, NPSH in Centrifugla Pumps—Significance, Calculation, Measurement, Maschinenbau, Frankfurt, Germany.
  5. L. Stoffel and G. Ludwig, “The influence of the gap flow at the impeller inlet on cavitation and part load recirculation in a centrifugal pump,” in Proceedings of the 3rd International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC '90), Honolulu, Hawaii, USA, April 1990.
  6. L. Stoffel and G. Ludwig, “Experimental investigation of the cavitation in a jet discharging into a uniform cross-flow,” in Proceedings of the 8th Conference on Fluid Machinery, Budapest, Hungary, September 1987.
  7. B. Schiavello, T. Arisawa, and G. Merenco, “Flow visualization—a design tool to improve pump cavitation performance,” in Proceeding of 2nd International Symposium on Transport Phenomena, Dynamics, and Design of Rotating Machinery (ISROMAC '88), Honolulu, Hawaii, USA, April 1988.
  8. O. Schiele, P. Hergt, and G. Mollenkopf, “Some views on the different cavitation criteria of a pump,” in Proceeding of the 5th Conference on Fluid Machinery, Budapest, Hungary, September 1975.
  9. H. Grein, “Kavitation—eine Übersicht,” Sulzer Forschungsheft, pp. 87–112, 1974. View at Google Scholar
  10. G. Bark, “Cloud cavitation—preliminary classification of mechanisms and observations on full scale ship propellers,” in Proceedings of the 3rd International Symposium on Cavitation, Grenoble, France, April 1998.
  11. G. E. Reisman, Y.-C. Wang, and C. E. Brennen, “Observations of shock waves in cloud cavitation,” Journal of Fluid Mechanics, vol. 355, pp. 255–283, 1998. View at Publisher · View at Google Scholar