Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2009, Article ID 265198, 8 pages
http://dx.doi.org/10.1155/2009/265198
Research Article

Multiresolution Wavelet Analysis of the Dynamics of a Cracked Rotor

1Department of Mechanical Engineering, Cleveland State University, 2121 Euclid Ave., Cleveland, OH 44115-2214, USA
2Department of Mathematical Sciences, Indiana University, 402 N. Blackford Street, Indianapolis, IN 46202, USA
3Department of Mechanics, Technical University of Lublin, Nadbystrzycka 36, 20-618 Lublin, Poland

Received 17 December 2008; Revised 22 April 2009; Accepted 22 June 2009

Academic Editor: Agnes Muszynska

Copyright © 2009 Jerzy T. Sawicki et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Gasch, “A survey of the dynamic behaviour of a simple rotating shaft with a transverse crack,” Journal of Sound and Vibration, vol. 160, no. 2, pp. 313–332, 1993. View at Publisher · View at Google Scholar
  2. A. D. Dimarogonas, “Vibration of cracked structures: a state of the art review,” Engineering Fracture Mechanics, vol. 55, no. 5, pp. 831–857, 1996. View at Publisher · View at Google Scholar
  3. A. W. Doebling, C. R. Farrar, M. B. Prime, and D. W. Shevitz, “Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review,” Tech. Rep. LA-13070-MS, Los Alamos National Laboratory, Los Alamos, New Mexico, 1996. View at Google Scholar
  4. G. Sabnavis, R. G. Kirk, M. Kasarda, and D. Quinn, “Cracked shaft detection and diagnostics: a literature review,” Shock and Vibration Digest, vol. 36, no. 4, pp. 287–296, 2004. View at Google Scholar
  5. Y. Ishida, “Cracked rotors: industrial machine case histories and nonlinear effects shown by simple Jeffcott rotor,” Mechanical Systems and Signal Processing, vol. 22, no. 4, pp. 805–817, 2008. View at Publisher · View at Google Scholar
  6. F. F. Ehrich, Handbook of Rotordynamics, Kriegar, Malabar, Fla, USA, 1999.
  7. S. Prabhakar, A. S. Sekhar, and A. R. Mohanty, “Detection and monitoring of cracks in a rotor-bearing system using wavelet transforms,” Mechanical Systems and Signal Processing, vol. 15, no. 2, pp. 447–450, 2001. View at Publisher · View at Google Scholar
  8. A. S. Sekhar, “Crack detection through wavelet transform for a run-up rotor,” Journal of Sound and Vibration, vol. 259, no. 2, pp. 461–472, 2003. View at Publisher · View at Google Scholar
  9. A. S. Sekhar, “Crack identification in a rotor system: a model-based approach,” Journal of Sound and Vibration, vol. 270, no. 4-5, pp. 887–902, 2004. View at Google Scholar
  10. A. S. Sekhar, “Model-based identification of two cracks in a rotor system,” Mechanical Systems and Signal Processing, vol. 18, no. 4, pp. 977–983, 2004. View at Publisher · View at Google Scholar
  11. J. E. T. Penny and M. I. Friswell, “Simplified modeling of rotor cracks,” in Proceedings of the ISMA 27, pp. 607–615, Leuven, Belgium, 2002.
  12. J. T. Sawicki, M. I. Friswell, A. H. Pesch, and A. Wroblewski, “Condition monitoring of rotor using active magnetic actuator,” in Proceedings of the ASME Turbo Expo: Power for Land, Sea and Air, Berlin, Germany, June 2008, paper no. GT2008-5116.
  13. J. T. Sawicki, “Rotor crack detection using active magnetic bearings,” Solid State Phenomena, vol. 144, pp. 9–15, 2009. View at Google Scholar
  14. J. T. Sawicki, X. Wu, G. Y. Baaklini, and A. L. Gyekenyesi, “Vibration-based crack diagnosis in rotating shafts during acceleration through resonance,” in Nondestructive Evaluation and Health Monitoring of Aerospace Materials and Composites II, vol. 5046 of Proceedings of SPIE, pp. 1–10, 2003. View at Publisher · View at Google Scholar
  15. X. Wu, M. I. Friswell, J. T. Sawicki, and G. Y. Baaklini, “Finite element analysis of coupled lateral and torsional vibrations of a rotor with multiple cracks,” in Proceedings of the ASME Turbo Expo, vol. 4, pp. 841–850, Reno-Tahoe, Nev, USA, 2005, paper no. GT2005-68839.
  16. I. Imam, S. H. Azzaro, R. J. Bankert, and J. Scheibel, “Development of an on-line rotor crack detection and monitoring system,” Journal of Vibration, Acoustics, Stress, and Reliability in Design, vol. 111, no. 3, pp. 241–250, 1989. View at Google Scholar
  17. T. Iwatsubo, S. Arii, and J. Lund, “Detection of a transverse crack in a rotor shaft by adding an external force,” in Proceedings of the IMechE Vibrations in Rotating Machinery, pp. 275–282, 1992, paper no. C432/093.
  18. R. R. Humphris, “A device for generating diagnostic information for rotating machinery using magnetic bearings,” in Proceedings of the Magnetic Bearings, Magnetic Drives, and Dry Gas Seals Conference & Exhibition (MAG '92), pp. 123–135, Alexandria, Va, USA, 1992.
  19. C. Zhu, D. A. Robb, and D. J. Ewins, “The dynamics of a cracked rotor with an active magnetic bearing,” Journal of Sound and Vibration, vol. 265, no. 3, pp. 469–487, 2003. View at Publisher · View at Google Scholar
  20. D. D. Quinn, G. Mani, M. E. F. Kasarda, T. Bash, D. J. Inman, and R. G. Kirk, “Damage detection of a rotating cracked shaft using an active magnetic bearing as a force actuator—analysis and experimental verification,” IEEE/ASME Transactions on Mechatronics, vol. 10, no. 6, pp. 640–647, 2005. View at Publisher · View at Google Scholar
  21. J. E. T. Penny, M. I. Friswell, and C. Zhou, “Condition monitoring of rotating machinery using active magnetic bearings,” in Proceedings of the ISMA International Conference on Noise and Vibration Engineering, pp. 3497–3506, Leuven, Belgium, 2006.
  22. G. Mani, D. D. Quinn, and M. Kasarda, “Active health monitoring in a rotating cracked shaft using active magnetic bearings as force actuators,” Journal of Sound and Vibration, vol. 294, no. 3, pp. 454–465, 2006. View at Publisher · View at Google Scholar
  23. G. T. Zheng, “Vibration of a rotor system with a switching crack and detection of the crack,” Journal of Engineering for Gas Turbines and Power, vol. 120, no. 1, pp. 149–154, 1998. View at Google Scholar
  24. M.-C. Wu and S.-C. Huang, “In-plane vibration and crack detection of a rotating shaft-disk containing a transverse crack,” Journal of Vibration and Acoustics, vol. 120, no. 2, pp. 551–556, 1998. View at Google Scholar
  25. J. T. Sawicki, X. Wu, A. L. Gyekenyesi, and G. Y. Baaklini, “Application of nonlinear dynamics tools for diagnosis of cracked rotor vibration signatures,” in Nondestructive Evaluation and Health Monitoring of Aerospace Materials, Composites, and Civil Infrastructure IV, vol. 5767 of Proceedings of SPIE, pp. 286–297, 2005. View at Publisher · View at Google Scholar
  26. G. Litak, J. T. Sawicki, and R. Kasperek, “Cracked rotor detection by recurrence plots,” Nondestructive Testing and Evaluation, 2008, In press. View at Google Scholar
  27. D. Guo and Z. K. Peng, “Vibration analysis of a cracked rotor using Hilbert-Huang transform,” Mechanical Systems and Signal Processing, vol. 21, no. 8, pp. 3030–3041, 2007. View at Publisher · View at Google Scholar
  28. H. Adeli, Z. Zhou, and N. Dadmehr, “Analysis of EEG records in an epileptic patient using wavelet transform,” Journal of Neuroscience Methods, vol. 123, no. 1, pp. 69–87, 2003. View at Publisher · View at Google Scholar
  29. J. R. Kulkarni, “Wavelet analysis of the association between the Southern Oscillation and the Indian summer monsoon,” International Journal of Climatology, vol. 20, no. 1, pp. 89–104, 2000. View at Publisher · View at Google Scholar
  30. J. B. Ramsey and C. Lampart, “Decomposition of economic relationships by timescale using wavelets: money and income,” Macroeconomic Dynamics, vol. 2, no. 1, pp. 49–71, 1998. View at Google Scholar
  31. H. Lundstedt, “Wavelet reconstructions of solar magnetic activity,” Journal of Physics IV, vol. 139, pp. 167–174, 2006. View at Publisher · View at Google Scholar
  32. A. K. Sen, “Multiscale analysis of riverflow variability in the British isles,” submitted for publication.
  33. G. Qi, A. Barhorst, J. Hashemi, and G. Kamala, “Discrete wavelet decomposition of acoustic emission signals from carbon-fiber-reinforced composites,” Composites Science and Technology, vol. 57, no. 4, pp. 389–403, 1997. View at Google Scholar
  34. S. A. Adewusi and B. O. Al-Bedoor, “Wavelet analysis of vibration signals of an overhang rotor with a propagating transverse crack,” Journal of Sound and Vibration, vol. 246, no. 5, pp. 777–793, 2001. View at Publisher · View at Google Scholar
  35. H. Hatanaka, Y. Kawano, N. Ido, M. Hato, and M. Tagami, “Ultrasonic testing with advanced signal processing for concrete structures,” Nondestructive Testing and Evaluation, vol. 20, no. 2, pp. 115–124, 2005. View at Publisher · View at Google Scholar