Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2009, Article ID 709754, 7 pages
http://dx.doi.org/10.1155/2009/709754
Research Article

Some Considerations about the Rotating Cell Structure

Mechanical Engineering Department, University of Cagliari, Piazza D'armi, 09123 Cagliari, Italy

Received 31 May 2009; Accepted 5 August 2009

Academic Editor: Yutaka Ohta

Copyright © 2009 Franco Nurzia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Fabri and R. Siestrunck, “Rotating stall in axial flow compressors,” Journal of the Aeronautical Sciences, pp. 805–812, 1957. View at Google Scholar
  2. I. J. Day and N. A. Cumpsty, “The measurement and interpretation of flow within rotating stall cells in axial compressors,” Journal of Mechanical Engineering Sciences, vol. 20, no. 2, 1978. View at Google Scholar
  3. U. Seidel, “Rotating stall cell and von karman vortex steet a meteorological theory,” in Axial Flow Compressors, Lecture Series 1992–2002, von Karman Institute for Fluid Dynamics, Rhode-Saint-Genèse, Belgium, 1992. View at Google Scholar
  4. H. W. Emmons, C. E. Pearson, and P. Grant, “Compressor surge and stall propagation,” Transaction of the ASME, pp. 455–469, 1955. View at Google Scholar
  5. F. K. Moore, “A theory of rotating stall of multistage axial compressors—part I: small disturbances—part II: finite disturbances—part III: limit cycles,” Journal of Engineering for Gas Turbines and Power, vol. 106, no. 2, pp. 313–336, 1984. View at Google Scholar · View at Scopus
  6. F. K. Moore and E. M. Greitzer, “A theory of post stall transients in axial compression systems—part 1: development of equations,” Journal of Turbomachinery, vol. 108, pp. 68–76, 1986. View at Google Scholar
  7. D. K. Das and H. K. Jiang, “An experimental study of rotating stall in a multistage axial flow compressor,” Journal of Engineering for Gas Turbines and Power, vol. 106, no. 3, pp. 542–551, 1984. View at Google Scholar · View at Scopus
  8. F. A. E. Breugelmans and K. Mathioudakis, “The three dimensional flow field inside an axial flow compressor operating in rotating stall,” in Proceedings of the 7th ISABE Conference, pp. 726–733, 1985.
  9. C. Palomba, P. Puddu, and F. Nurzia, “3D flow field measurement around a rotating stall cell,” in Proceedings of the 43rd International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, June 1998, ASME 98-GT-596.
  10. F. Nurzia, C. Palomba, and P. Puddu, “Experimental investigation of stall in a two-stage compressor,” in Proceedings of the ASME Turbo Expo, Monaco, Spain, June 2000, ASME 2000-GT-571.
  11. P. Puddu, C. Palomba, and F. Nurzia, “Comparison of pressure and velocity measurements during one cell rotating stall,” in Proceedings of the MIS-MAC VII, pp. 39–48, Cagliari, Italy, April 2001.
  12. P. Puddu, “Misure di turbolenza in elementi fissi e rotanti di turbomacchine con l'impiego di sonde a filo caldo,” in MIS-MAC IV, Trieste, Italy, 1993.
  13. C. Palomba, “Analysis of local flow structure and global compressor performance during rotating stall,” in Proceedings of the ASME Turbo Expo, vol. 5, pp. 537–544, Vienna, Austria, June 2004, GT2004-53816.