Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2009 (2009), Article ID 936251, 9 pages
http://dx.doi.org/10.1155/2009/936251
Research Article

Systems Design, Fabrication, and Testing of a High-Speed Miniature Motor for Cryogenic Cooler

1Department of Mechanical, Materials, and Aerospace Engineering, University of Central Florida, 4000 Central Florida Blvd, Orlando, FL 32816, USA
2Mechanical & Aerospace Engineering, University of Florida, Gainesville, FL 32611, USA

Received 13 June 2009; Revised 20 September 2009; Accepted 12 October 2009

Academic Editor: Yasutomo Kaneko

Copyright © 2009 Dipjyoti Acharya et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Zhou, A miniature reverse-brayton cycle cryocooler and its key components: high effectiveness heat recuperator and miniature centrifugal compressor, Ph.D dissertation, University of Central Florida, Orlando, Fla, USA, 2004.
  2. L. Zheng, T. X. Wu, D. Acharya et al., “Design of a super-high speed cryogenic permanent magnet synchronous motor,” IEEE Transactions on Magnetics, vol. 41, no. 10, pp. 3823–3825, 2005. View at Publisher · View at Google Scholar
  3. L. Zhao, C. H. Ham, Q. Han et al., “Design of optimal digital controller for stable super-high-speed permanent-magnet synchronous motor,” IEE Proceedings Electric Power Applications, vol. 153, no. 2, pp. 213–218, 2006. View at Publisher · View at Google Scholar
  4. O. E. Jones, D. Franklin, H. L. Horton, and H. H. Ryffel, Machinery's Handbook, Industrial Press, New York, NY, USA, 27th edition, 2004.
  5. Roarke Handbook of Stress and Strain, McGraw-Hill Professional, New York, NY, USA, 7th edition, 2001.
  6. J. R. Shigley, Mechanical Engineering Design, McGraw-Hill, New York, NY, USA, 1989.
  7. S. Timoshenko, Elements of Strength of Materials, Van Nostrand, Princeton, NJ, USA, 1962.
  8. W. M. Kays, M. Crawford, and B. Weigand, Convective Heat and Mass Transfer, McGraw-Hill, New York, NY, USA, 4th edition, 2004.
  9. F. P. Incropera, D. P. DeWitt, T. L. Bergman, and A. S. Lavine, Fundamentals of Heat and Mass Transfer, John Wiley & Sons, Hoboken, NJ, USA, 6th edition, 2007.
  10. J. I. Provins and L. V. Lewis, “A non-coupled CFD-FE procedure to evaluate windage and heat transfer in rotor-stator cavities,” GT2004-53246.
  11. J. E. Vrancrik, “Prediction of windage power loss in alternators,” Tech. Rep. TND-4849, NASA-Langey, 1968. View at Google Scholar
  12. C. Gazley Jr., “Heat-transfer characteristics of the rotational and axial flow between concentric cylinders,” ASME Transactions, vol. 80, no. 1, pp. 79–90, 1958. View at Google Scholar
  13. T. Theodorsen and A. Regier, “Experiments on drag of revolving disks, cylinders and streamline rods at high speeds,” Tech. Rep. NACA 793, 1944. View at Google Scholar
  14. G. H. F. Nayler, Dictionary of Mechanical Engineering, Butterworth-Heineman, Oxford, UK, 4th edition, 1996.