Table of Contents Author Guidelines Submit a Manuscript
Journal of Chemistry
Volume 2013 (2013), Article ID 679567, 7 pages
http://dx.doi.org/10.1155/2013/679567
Research Article

Barrier Properties and Structural Study of Nanocomposite of HDPE/Montmorillonite Modified with Polyvinylalcohol

1Instituto de Investigaciones para la Industria Química (INIQUI-CONICET), Consejo de Investigaciones (CIUNSa), Facultad de Ingeniería (UNSa), Avenida Bolivia 5150, 4400 Salta, Argentina
2Instituto Tecnológico de Buenos Aires (ITBA), Instituto de Investigaciones para la Industria Química (INIQUI-UNSa-CONICET), Avenida Eduardo Madero 399, C1106ACD Buenos Aires, Argentina

Received 11 September 2012; Revised 1 February 2013; Accepted 5 February 2013

Academic Editor: Vincenzo Turco Liveri

Copyright © 2013 María C. Carrera et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. Ke and B. Yongping, “Improve the gas barrier property of PET film with montmorillonite by in situ interlayer polymerization,” Materials Letters, vol. 59, no. 27, pp. 3348–3351, 2005. View at Google Scholar
  2. O. Gain, E. Espuche, E. Pollet, M. Alexandre, and P. Dubois, “Gas barrier properties of poly(ε-caprolactone)/clay nanocomposites: influence of the morphology and polymer/clay interactions,” Journal of Polymer Science B, vol. 43, no. 2, pp. 205–214, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. E. Picard, A. Vermogen, J. F. Gérard, and E. Espuche, “Barrier properties of nylon 6-montmorillonite nanocomposite membranes prepared by melt blending: influence of the clay content and dispersion state. Consequences on modelling,” Journal of Membrane Science, vol. 292, no. 1-2, pp. 133–144, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. S. S. Ray, K. Yamada, M. Okamoto, A. Ogani, and K. Ueda, “New polylactide/layered silicate nanocomposites. 3. High-performance biodegradable materials,” Chemistry of Materials, vol. 15, no. 7, pp. 1456–1465, 2003. View at Publisher · View at Google Scholar
  5. T. Ogasawara, Y. Ishida, T. Aoki, and T. Ogura, “Helium gas permeability of montmorillonite/epoxy nanocomposites,” Composites A, vol. 37, no. 12, pp. 2236–2240, 2006. View at Publisher · View at Google Scholar
  6. S. S. Ray and M. Okamoto, “Polymer-layered silicate nanocomposite: a review from preparation to processing,” Progress in Polymer Science, vol. 28, pp. 1539–1641, 2003. View at Google Scholar
  7. E. P. Giannelis, “Polymer-layered silicate nanocomposites: Synthesis, properties and applications,” The Applied Organometallic Chemistry, vol. 12, pp. 675–680, 1998. View at Google Scholar
  8. E. P. Giannelis, “Polymer layered silicate nanocomposites,” Advanced Materials, vol. 8, pp. 29–35, 1996. View at Google Scholar
  9. K. Yano, A. Usuki, and A. Okada, “Synthesis and properties of polyimide-clay hybrid films,” Journal of Polymer Science A, vol. 35, no. 11, pp. 2289–2294, 1997. View at Google Scholar · View at Scopus
  10. L. E. Nielsen, “Models for the permeability of filled polymers systems,” Journal of Macromolecular Science, Part A, vol. 1, no. 5, pp. 929–942, 1967. View at Google Scholar
  11. N. K. Lape, E. E. Nuxoll, and E. L. Cussler, “Polydisperse flakes in barrier films,” Journal of Membrane Science, vol. 29, pp. 29–37, 2004. View at Publisher · View at Google Scholar
  12. D. Perry, W. J. Ward, and E. L. Cussler, “Unsteady diffusion in barrier membranes,” Journal of Membrane Science, vol. 44, no. 2-3, pp. 305–311, 1989. View at Publisher · View at Google Scholar
  13. N. K. Lape, C. Yang, and E. L. Cussler, “Flake-filled reactive membranes,” Journal of Membrane Science, vol. 209, no. 1, pp. 271–282, 2002. View at Publisher · View at Google Scholar
  14. C. Yang, W. H. Smyrl, and E. L. Cussler, “Flake alignment in composite coatings,” Journal of Membrane Science, vol. 231, no. 1-2, pp. 1–12, 2004. View at Publisher · View at Google Scholar
  15. W. R. Falla, M. Mulski, and E. L. Cussler, “Estimating diffusion through flake-filled membranes,” Journal of Membrane Science, vol. 119, no. 1, pp. 129–138, 1996. View at Publisher · View at Google Scholar
  16. R. K. Bharadwaj, “Modeling the barrier properties of polymer-layered silicate nanocomposites,” Macromolecules, vol. 34, no. 26, pp. 9189–9192, 2001. View at Publisher · View at Google Scholar
  17. A. A. Gusev and H. R. Lusti, “Rational design of nanocomposites for barrier applications,” Advanced Materials, vol. 13, pp. 1641–1643, 2001. View at Google Scholar
  18. G. H. Fredrickson and J. Bicerano, “Barrier properties of oriented disk composites,” Journal of Chemical Physics, vol. 110, pp. 2181–2188, 1999. View at Publisher · View at Google Scholar
  19. S. S. Ray, K. Yamada, M. Okamoto, A. Ogami, and K. Ueda, “New polylactide/layered silicate nanocomposites. 3. High-performance biodegradable materials,” Chemistry of Materials, vol. 15, no. 7, pp. 1456–1465, 2003. View at Publisher · View at Google Scholar
  20. S. S. Ray, K. Okamoto, and M. Okamoto, “Structure-property relationship in biodegradable poly(butylene succinate)/layered silicate nanocomposites,” Macromolecules, vol. 36, no. 7, pp. 2355–2367, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. H. R. Dennis, D. L. Hunter, D. Chang et al., “Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites,” Polymer, vol. 42, no. 23, pp. 9513–9522, 2001. View at Google Scholar · View at Scopus
  22. J. W. Gilman, A. B. Morgan, E. P. Giannelis, M. Wuthenow, and E. Manias, “Flammability and thermal stability studies of polymer layered-silicate (Clay) nanocomposites-II,” in Proceedings of the BCC Conference on Flame Retardancy, pp. 1–11, 1999.
  23. P. G. Nahin and P. S. Backlund, Union Oil Company, United States patent no. 3, 084, 117, 1936.
  24. R. A. Vaia, H. Ishii, and E. P. Giannelis, “Synthesis and properties of two-dimensional nanostructures by direct intercalation of polymer melts in layered silicates,” Chemistry of Materials, vol. 5, no. 12, pp. 1694–1696, 1993. View at Google Scholar · View at Scopus
  25. R. A. Vaia, K. D. Jandt, E. J. Kramer, and E. P. Giannelis, “Microstructural evolution of melt intercalated polymer-organically modified layered silicates nanocomposites,” Chemistry of Materials, vol. 8, no. 11, pp. 2628–2635, 1996. View at Google Scholar · View at Scopus
  26. R. A. Vaia and E. P. Giannelis, “Lattice model of polymer melt intercalation in organically-modified layered silicates,” Macromolecules, vol. 30, no. 25, pp. 7990–7999, 1997. View at Google Scholar · View at Scopus
  27. M. Alexandre and P. Dubois, “Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials,” Materials Science and Engineering R, vol. 28, no. 1, pp. 1–63, 2000. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Pavlidoua and C. D. Papaspyrides, “A review on polymer-layered silicate nanocomposites,” Progress in Polymer Science, vol. 33, pp. 1119–1198, 2008. View at Google Scholar
  29. P. C. Lebaron, Z. Wang, and T. J. Pinnavaia, “Polymer-layered silicate nanocomposites: an overview,” Applied Clay Science, vol. 15, no. 1-2, pp. 11–29, 1999. View at Publisher · View at Google Scholar · View at Scopus
  30. J. K. Kim, C. Hu, R. S. C. Woo, and M. L. Sham, “Rheology of confined polymer melts under shear flow: strong adsorption limit,” Composites Science and Technology, vol. 65, p. 805, 2005. View at Google Scholar
  31. K. Chrissopoulou, I. Altintzi, S. H. Anastasiadis et al., “Controlling the miscibility of polyethylene/layered silicate nanocomposites by altering the polymer/surface interactions,” Polymer, vol. 46, no. 26, pp. 12440–12451, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. G. Gorrasi, M. Tortora, V. Vittoria et al., “Vapor barrier properties of polycaprolactone montmorillonite nanocomposites: effect of clay dispersion,” Polymer, vol. 44, no. 8, pp. 2271–2279, 2003. View at Publisher · View at Google Scholar · View at Scopus
  33. J. M. Yeh, H. Y. Huang, C. L. Chen, W. F. Su, and Y. H. Yu, “Siloxane-modified epoxy resin-clay nanocomposite coatings with advanced anticorrosive properties prepared by a solution dispersion approach,” Surface and Coatings Technology, vol. 200, no. 8, pp. 2753–2763, 2006. View at Publisher · View at Google Scholar · View at Scopus
  34. J. Welti-Chanes, F. Vergara-Balderas, J. A. Guerrero-Beltrán, R. García Torres, and R. Villa-Rojas, “Métodos, criterios y modelación para la selección de películas plásticas en atmósferas modificadas,” in Segundo Simposio Internacional de Innovación y Desarrollo de Alimentos, Montevideo, Uruguay, Septiembre 2005.
  35. S. Kenig, A. Ophir, O. Shepelev, and F. Weiner, “High barrier blow molded containers based on Nano Clay Composites,” in Proceedings of the Annual Technical Conference on the Society of Plastics Engineering, San Francisco, Calif, USA, May 2001.
  36. M. C. Carrera, Preparación y efecto de los nanocompuestos polímero-arcilla sobre las propiedades de barrera y mecánicas para polímeros hidrocarbonados y biodegradables [Ph.D. thesis], Universidad Nacional de Salta, Salta, Argentina, 2011.
  37. K. H. Wang, M. H. Choi, C. M. Koo, Y. S. Choi, and I. Chung, “Synthesis and characterization of maleated polyethylene/clay nanocomposites,” Journal of Polymer, vol. 42, no. 24, pp. 9819–9826, 2001. View at Publisher · View at Google Scholar
  38. H. A. Khonakdar, J. Morshedian, U. Wagenknecht, and S. H. Jafari, “An investigation of chemical crosslinking effect on properties of high-density polyethylene,” Polymer, vol. 44, no. 15, pp. 4301–4309, 2003. View at Publisher · View at Google Scholar · View at Scopus
  39. C. Lotti, C. S. Isaac, M. C. Branciforti, R. M. V. Alves, S. Liberman, and R. E. S. Bretas, “Rheological, mechanical and transport properties of blown films of high density polyethylene nanocomposites,” European Polymer Journal, vol. 44, no. 5, pp. 1346–1357, 2008. View at Publisher · View at Google Scholar · View at Scopus
  40. G. Choudalakis and A. D. Gotsis, “Permeability of polymer/clay nanocomposites: a review,” European Polymer Journal, vol. 45, no. 4, pp. 967–984, 2009. View at Publisher · View at Google Scholar · View at Scopus