In the article titled “Final Machining of Large-Scale Engine Block with Modularized Fixture and Virtual Manufacturing Technologies” [1], there was an error in the Acknowledgments section, where the sentence “This work was partially supported by the National Natural Science Foundation of China (2017A0497)” should be corrected to “This work was partially supported by the National Natural Science Foundation of Ningxia (NZ17236).”
Corrigendum | Open Access
Corrigendum to “Final Machining of Large-Scale Engine Block with Modularized Fixture and Virtual Manufacturing Technologies”
Received29 Jul 2018
Accepted06 Aug 2018
Published02 Sept 2018
References
H. Liu, F. Peng, and Y. Liu, “Final Machining of Large-Scale Engine Block with Modularized Fixture and Virtual Manufacturing Technologies,” Journal of Engineering, vol. 2017, Article ID 3648954, 6 pages, 2017.
View at: Publisher Site | Google Scholar
Copyright
Copyright © 2018 Hong Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.