Table of Contents Author Guidelines Submit a Manuscript
Journal of Engineering
Volume 2018 (2018), Article ID 7210467, 2 pages
https://doi.org/10.1155/2018/7210467
Corrigendum

Corrigendum to “Slip Effect on MHD Chemically Reacting Convictive Boundary Layer Flow with Heat Absorption”

1Department of Mathematics, University of Swaziland, P. Bag 4, Kwaluseni M201, Swaziland
2Mechanical Engineering Department, Arba Minch University, B.O. Box 21, Arba Minch, Ethiopia

Correspondence should be addressed to Mekonnen Shifferaw Ayano

Received 9 August 2017; Accepted 24 August 2017; Published 1 January 2018

Copyright © 2018 Mekonnen Shifferaw Ayano and Negussie Tadege Demeke. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


In the article titled “Slip Effect on MHD Chemically Reacting Convictive Boundary Layer Flow with Heat Absorption” [1] there were two errors, which should be corrected as follows:(1)The horizontal axis in Figures 1 and 2 did not include sufficiently large values; corrected figures are presented below.(2)The boundary condition at , in (1), is rephrased (for clarity) in the form where , , , , and are constants.

The nondimensional variables (see (2)) are rephrased as follows:Equations (3) will take the formwhere is micropolar parameter, is internal heat generation/absorption parameter, is the Prandtl number, is magnetic parameter, and .