Table of Contents Author Guidelines Submit a Manuscript
Research Article
Journal of Nanomaterials
Volume 2018, Article ID 6179492, 1 page
https://doi.org/10.1155/2018/6179492
Erratum

Erratum to “Preparation of Cu2Sn3S7 Thin-Film Using a Three-Step Bake-Sulfurization-Sintering Process and Film Characterization”

1Department of Materials Science and Engineering, National Cheng Kung University, Tainan 701, Taiwan
2The Instrument Center, National Cheng Kung University, Tainan 701, Taiwan

Correspondence should be addressed to Fei-Yi Hung; wt.ude.ukcn.liam@gnuhyf

Received 5 November 2018; Accepted 13 November 2018; Published 13 December 2018

Copyright © 2018 Tai-Hsiang Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


In the article titled “Preparation of Cu2Sn3S7 Thin-Film Using a Three-Step Bake-Sulfurization-Sintering Process and Film Characterization” [1], the name of the first author was given incorrectly as Tai-Hsiang Lui. The author’s name should have been written as Tai-Hsiang Liu. The revised authors’ list is shown above.

References

  1. T.-H. Lui, F.-Y. Hung, T.-S. Lui, and K.-J. Chen, “Preparation of Cu2Sn3S7 thin-film using a three-step bake-sulfurization-sintering process and film characterization,” Journal of Nanomaterials, vol. 2015, Article ID 969783, 7 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus