Shock and Vibration / 2018 / Article / Tab 1

Research Article

Discrete Element Simulation of Conical Pick’s Coal Cutting Process under Different Cutting Parameters

Table 1

7 sets of various parameters.

Cutting parametersTraction speed/m/sDrum angular velocity/rad/sInstallation angle°

Different angular velocity① 0.075.2345
② 0.075.7645
③ 0.076.2845
Different traction speed④ 0.055.7645
② 0.075.7645
⑤ 0.095.7645
Different installation angle⑥ 0.075.7640
② 0.075.7645
⑦ 0.075.7650

Notes. The data in the Table 1 are the cutting parameters range of single pick.