sv - Editorial Board

Shock and Vibration

/ Editorial Board

On this page

Editorial Board

Chief Editor

Huu-Tai Thai, The University of Melbourne, Australia

Associate Editors

Ivo Caliò, Universita di Catania, Italy
Nawawi Chouw, University of Auckland, New Zealand
Longjun Dong, Central South University, China
Farzad Ebrahimi, Imam Khomeini International University, Iran
Mickaël Lallart, Instituts Nationaux des Sciences Appliquees , France
Vadim V. Silberschmidt, Loughborough University, United Kingdom
Mario Terzo, University of Naples Federico II, Italy
Angelo Marcelo Tusset, Federal University of Technology – Paraná, Brazil

Academic Editors

Omid A. Yamini, Department of Civil Engineering, K. N. Toosi University of Technology, Tehran, Iran, Iran
Maher Abdelghani, Department of Mechanical Engineering ISSAT-University of Sousse , Tunisia
Mohamed A. A. Abdelkareem, Automotive and Tractors Engineering Department, Faculty of Engineering, Minia University, El-Minia 61519, Egypt
Haim Abramovich, Faculty of Aerospace Engineering, Technion, Israel Institute of Technology , Israel
Desmond Adair, Nazarbayev University, Kazakhstan
Manuel Aenlle Lopez, University of Oviedo, Spain
Brij N. Agrawal, Naval Postgraduate School Monterey, USA
Ehsan Ahmadi, Faculty of Engineering and Physical Sciences University of Southampton , United Kingdom
Felix Albu, Valahia University of Targoviste, Romania
Marco Alfano, University of Calabria, Italy
Sara Amoroso, University of Chieti-Pescara, Italy
Huaming An, Kunming University of Science and Technology, China
P. Antonaci, Department of Structural Geotechnical and Building Engineering Politecnico di Torino, Italy
José V. Araújo dos Santos, Instituto Superior Técnico, Universidade de Lisbon, Portugal
Lutz Auersch, Federal Institute of Material Research and Testing (BAM), Germany
Matteo Aureli, University of Nevada, Reno, USA
Azwan I. Azmi, Universiti Malaysia Perlis , Malaysia
Yi Bao, Stevens Inst Technol, Dept Civil Environm & Ocean Engn, Hoboken, NJ 07030 USA, USA
Antonio Batista, Universidade Estadual de Ponta Grossa, Brazil
Mattia Battarra, University of Ferrara, Italy
Mahmoud Bayat, University of Pittsburgh, USA
Marco Belloli, Politecnico di Milano, Italy
Francisco Beltran-Carbajal, Universidad Autonoma Metropolitana, Mexico
Denis Benasciutti, University of Ferrara, Italy
Marta Berardengo, University of Genoa, Italy
Sébastien Besset, Laboratoire de Tribologie et Dynamique des Systèmes - École Centrale de Lyon, France
Giosuè Boscato, University of Venice, Italy
Fabio Botta, Università degli Studi Roma Tre, Italy
Francesco Braghin, Politecnico di Milano, Italy
Giuseppe Brandonisio, Department of Structural Engineering University of Naples Federico II , Italy
Francesco Bucchi, University of Pisa, Italy
Rafał Burdzik, Silesian University of Technology, Poland
Salvatore Caddemi, Università degli Studi di Catania, Italy
Wahyu Caesarendra, Universiti Brunei Darussalam, Brunei Darussalam
Baoping Cai, China University of Petroleum, Shandong, China
Sandro Carbonari, Dip. di Ingegneria Civile Edile ed Architettura Univ. Politecnica delle Marche, Italy
Cristina Castejón, Universidad Carlos III de Madrid, Spain
Nicola Caterino, University of Naples Parthenope, Italy
Gabriele Cazzulani, Politecnico di Milano, Italy
Athanasios Chasalevris, National Technical University of Athens, Greece
Guoda Chen, Key Laboratory of Special Purpose Equipment and Advanced Processing Technology Ministry of Education & Zhejiang Province Zhejiang University of Technology, China
Zengshun Chen, School of Civil Engineering, Chongqing University, China
Xavier Chiementin, University of Reims Champagne Ardenne, France
Simone Cinquemani, Politecnico di Milano, Italy
Marco Civera, Politecnico di Torino, Italy
Marco Cocconcelli, University of Modena and Reggio Emilia , Italy
Alvaro Cunha, University of Porto (FEUP), Portugal
Giorgio Dalpiaz, University of Ferrara, Italy
Thanh-Phong Dao, Ho Chi Minh City University of Technology and Education, Vietnam
Arka Jyoti Das, CSIR-Central Institute of Mining and Fuel Research, Dhanbad, India, India
Raj Das, RMIT University, Australia
Silvio L.T. De Souza, Universidade Federal de São João del-Rei, Brazil
Xiaowei Deng, University of Hong Kong, Hong Kong
Dario Di Maio, University of Twente, The Netherlands
Raffaella Di Sante, Università di Bologna, Italy
Luigi Di Sarno, Università degli Studi del Sannio, Italy
Enrique Lopez Droguett, University of Chile, Chile
Mâdâlina Dumitriu, Depart. of Railway Vehicles University POLITEHNICA of Bucharest , Romania
Sami El-Borgi, AMechanical Engineering Program, Texas A&M University at Qatar, PO Box 23874, Education City, Doha, Qatar, Qatar
Mohammad Elahinia, The University of Toledo, USA
Said Elias, University of Iceland, Iceland
Selçuk Erkaya, Erciyes University, Turkey
Cheng Fang, Tongji University, China
Gaoliang Fang, McMaster University, Canada
Fiorenzo A. Fazzolari, University of Liverpool, United Kingdom
Chengwei Fei, Fudan University, China
Luis A. Felipe-Sese, Universidad de Jaen, Spain
Matteo Filippi, Politecnico di Torino, Italy
Piotr Folęga, Silesian University of Technology, Poland
Paola Forte, University of Pisa, Italy
Francesco Franco, Università di Napoli Federico II, Italy
Juan C. G. Prada, Universidad Carlos III de Madrid, Spain
Roman Gabl, School of Engineering Institute for Energy Systems University of Edinburgh, United Kingdom
Pedro Galvín, Universidad de Sevilla, Spain
Jinqiang Gan, School of Mechanical Engineering and Electronic Information China University of Geosciences (Wuhan) , China
Shan Gao, Harbin Institute of Technology, China
Arturo García Garcia-Perez, Universidad de Guanajuato División de Ingenierías del Campus Irapuato–Salamanca , Mexico
Gianluca Gatti, University of Calabria, Italy
Rozaimi Ghazali, Universiti Teknologi Malaysia, Malaysia
Marco Gherlone, Politecnico di Torino, Italy
Anindya Ghoshal, Army Research Laboratory, USA
Gilbert R. Gillich, Babes-Bolyai University, Romania
Antonio Giuffrida, Politecnico di Milano Dipartimento di Energia , Italy
Annalisa Greco, Department of Civil Engineering and Architecture, University of Catania , Italy
Jiajie Guo, State Key Laboratory of Digital Manufacturing and Equipment Technology, School of Mechanical Science and Engineering , China
Amal Hajjaj, Loughborough University, United Kingdom
Mohammad A. Hariri-Ardebili, University of Colorado at Boulder, USA
Seyed M. Hashemi, Department of Aerospace Eng., Ryerson University, Canada
Xue-qiu He, University of Science and Technology Beijing, China
Agustin Herrera-May, Universidad Veracruzana, Mexico
M.I. Herreros, Astrobiology Center (CSIC-INTA), Spain
Kazuhiko Hiramoto, Niigata University, Japan
Duc-Duy Ho, Ho Chi Minh City University of Technology (HCMUT), Vietnam
Hamid Hosano, Kumamoto University, Japan
Jin Huang, Key Laboratory of Electronic Equipment Structure design of Ministry of Education, Xidian University, China
Ahmed Ibrahim, Department of Civil Engineering, University of Idaho, USA
Bernard W. Ikua, College of Engineering and Technology JKAUT , Kenya
Xingxing Jiang, School of Rail Transportation, Soochow University, China
Jiang Jin, Guangzhou University, China
Xiaohang Jin, [email protected], China
MOUSTAFA KASSEM, School of Civil Engineering, Engineering Campus, Universiti Sains Malaysia, Penang 14300, Malaysia
Sakdirat Kaewunruen, The University of Birmingham, United Kingdom
Shao-Bo Kang, Chongqing University, China
Yuri S. Karinski, National Building Research Institute , Israel
Andrzej Katunin, Silesian University of Technology, Poland
Manoj Khandelwal, Federation University Australia, Australia
Denise-Penelope Kontoni, University of the Peloponnese, Dept Civil Engn, Dr. Civil Eng., Assoc. Prof., 1 M Alexandrou Str, GR-26334 Patras, Greece, Greece
Mohammadreza Koopialipoor, Amirkabir Univ Technol, Fac Min & Met, Tehran 15914, Iran, Iran
Georges Kouroussis, University of Mons, Belgium
Genadijus Kulvietis, Department of Information Technologies Vilnius Gediminas Technical University , Lithuania
Pradeep Kundu, University of Cincinnati, USA
Simon Laflamme, Department of Civil, Construction, and Environmental Engineering, Iowa State University, USA
Luca Landi, University of Bologna, Italy
Moon G. Lee, Division of Mechanical Engineering Ajou University, Republic of Korea
Trupti Ranjan Lenka, National Institute of Technology Silchar, India
Arcanjo Lenzi, Federal University of Santa Catarina, Vibration and Acoustics Laboratory, Brazil
Marco Lepidi, University of Genoa, Italy
Jinhua Li, East China Jiaotong University, China
Shuang Li, Harbin Institute of Technology, China
Yuxing Li, Xi'an University of Technology, China
Zhixiong Li, China University of Mining and Technology, China
Xihui Liang, University of Manitoba, Canada
Tzu-Kang Lin, National Yang Ming Chiao Tung University, Taiwan
Jinxin Liu, Xi'an Jiaotong University, China
Ruonan Liu, Tianjin University, China
Xiang Liu, Key Laboratory of Traffic Safety on Track, Ministry of Education, School of Traffic & Transportation Engineering, Central South University, Changsha, People’s Republic of China, China
Xiuquan Liu, China University of Petroleum, China
Siliang Lu, Anhui University, China
Yixiang Lu, Anhui University, China
Zeqi Lu, Shanghai University, China
R. Luo, Department of Railway Engineering School of Civil Engineering Central South University, China
Tianshou Ma, Southwest Petroleum University, China
Nuno M. Maia, University of Lisbon, Portugal
Abdollah Malekjafarian, UCD, Ireland
Stefano Manzoni, Politecnico di Milano Department of Mechanics, Italy
Giuseppe Carlo Marano, Politecnico di Bari, Italy
Stefano Marchesiello, Politecnico di Torino, Italy
Francesco S. Marulo, Department of Industrial Engineering - Aerospace Section University of Naples Federico II , Italy
Traian Mazilu, Politechnica University, Bucharest, Romania
Nur Izzi Md Yusoff, Universiti Kebangsaan Malaysia, Malaysia
Vittorio Memmolo, University of Naples Federico II, Italy
Jean-Mathieu Mencik, INSA Centre Val de Loire, France
Laurent Mevel, Institut National de Recherche en Informatique et en Automatique, France
Letícia Fleck Fadel Miguel, UFRGS, Brazil
FuRen Ming, College of Shipbuilding Engineering, Harbin Engineering University, China
Fabio Minghini, University of Ferrara, Italy
Marco Miniaci, School of Aerospace Engineering School of Mechanical Engineering Georgia Institute of Technology, USA
Mahdi Mohammadpour, Wolfson School Loughborough University, United Kingdom
Rui Moreira, Universidade de Aveiro, Portugal
Emiliano Mucchi, Università di Ferrara, Italy
Sara Muggiasca, Politecnico di Milano, Italy
Tony Murmu, University of the West of Scotland, United Kingdom
Peter Múčka, Institute of Materials and Machine Mechanics of Slovak Academy of Sciences, Slovakia
Fehmi Najar, Applied Mechanics and Systems Research Laboratory, Tunisia Polytechnic School, University of Carthage , Tunisia
Roberto Nascimbene, European Centre for Training and Research in Earthquake Engineering, Italy
M. Z. Naser, Clemson University, USA
Amr A. Nassr, Dept. of Civil Engineering, Assiut Univ. , Egypt
Sundararajan Natarajan, Indian Institute of Technology-Madras, India
Toshiaki Natsuki, Shinshu University, Japan
Miguel Neves, Universidade de Lisboa, Portugal
Tuan Ngo, The University of Melbourne, Australia
Sy Dzung Nguyen, Industrial University of Hochiminh City, Division of Mechatronic Engineering, Hochiminh City, Republic of Korea
Trung Nguyen-Thoi, Ton Duc Thang University, Vietnam
Hung Nguyen-Xuan, Center for Interdisciplinary Research in Technology, Hutech University , Vietnam
Baoyu Ni, Harbin Engineering University, China
Gianni Niccolini, Department of Structural Geotechnical and Building Engineering Politecnico di Torino, Italy
Rodrigo Nicoletti, University of Sao Paulo, Brazil
Nicola Nisticò, Sapienza University of Roma , Italy
Bin Niu, Key Laboratory for Precision and Non-traditional Machining Technology of the Ministry of Education School of Mechanical Engineering Dalian University of Technology, China
Leilei Niu, Northeastern University, China
Yan Niu, Tiangong University, China
Lucio Olivares, Second University of Naples, Italy
Erkan Oterkus, University of Strathclyde, United Kingdom
Roberto Palma, Universitat Jaume I, Spain
Junhong Park, School of Mechanical Engineering, Hanyang University, 222Wangsimni-Ro, Seongdong-Gu, Seoul, Republic of Korea, Republic of Korea
Annamaria Pau, Dipartimento di Ingegneria Strutturale e Geotecnica Sapienza Universitá di Roma , Italy
Francesco Pellicano, Università di Modena e Reggio Emilia, Italy
Paolo Pennacchi, Politecnico di Milano, Italy
Giuseppe Petrone, Universita degli Studi di Napoli Federico II, Italy
Evgeny Petrov, University of Sussex, United Kingdom
Antonina Pirrotta, Università di Palermo, Italy
Franck Poisson, SNCF-Mobilités Test department, France
Luca Pugi, Università degli Studi di Firenze, Italy
Yi Qin, Chongqing University, China
Zhaoye Qin, Tsinghua University, China
Virginio Quaglini, Politecnico di Milano, Italy
Mohammad Rafiee, Polytechnique Montréal, Canada
Carlo Rainieri, University of Molise, Italy
Vasudevan Rajamohan, VIT University, Centre for Innovative Manufacturing Research, Vellore, India, India
Ricardo A. Ramirez-Mendoza, Tecnologico de Monterrey, Mexico City Campus, Mexico
José J. Rangel-Magdaleno, Instituto Nacional de Astrofísia, Óptica y Electrónica, Mexico
Didier Rémond, Instituts Nationaux des Sciences Appliquees, France
Dario Richiedei, Dipartimento di Tecnica e Gestione Dei Sistemi Industriali (DTG) Università Degli Studi di Padova , Italy
Francesco Ripamonti, Politecnico di Milano, Italy
Fabio Rizzo, University "G. d'Annunzio" of Chieti Pescara, Italy
Nibaldo Rodríguez, Pontificia Universidad Católica de Valparaíso, Chile
Carlo Rosso, Dipartimento di Ingegneria Meccanica e Aerospaziale Politecnico di Torino, Italy
Riccardo Rubini, University of Modena and Reggio Emilia, Italy
Salvatore Russo, Università Iuav di Venezia, Italy
Giuseppe Ruta, Sapienza University of Roma, Italy
Edoardo Sabbioni, Politecnico di Milano, Italy
N. A. Saeed, Menoufia University, Egypt
Pouyan Roodgar Saffari, Thammasat University, Iran
Filippo Santucci de Magistris, Università degli studi del Molise, Italy
Fabrizio Scozzese, University of Camerino - School of Architecture and Design, Italy
Abdullah Seçgin, Department of Mechanical Engineering, Dokuz Eylül University, 35100 Bornova, İzmir, Turkey
Roger Serra, INSA Centre Val de Loire, France
S. Mahdi Seyed-Kolbadi, K. N. Toosi University of Technology, Tehran, Iran
Changqing Shen, Soochow University, China
Yujie Shen, Jiangsu University, China
Bao-Jun Shi, School of Mechanical Engineering, Hebei University of Technology, China
Chengzhi Shi, Georgia Institute of Technology, USA
Gerardo Silva-Navarro, bCentro de Investigaci´on y de Estudios Avanzados del I.P.N., Ciudad de M´exico, Mexico
Marcos Silveira, UNESP-Bauru, sP, Brazil
Kumar V. Singh, Miami University, USA
Jean-Jacques Sinou, Ecole Centrale de Lyon, France
Isabelle Sochet, INSA Centre Val de Loire, France
Alba Sofi, University "Mediterranea" of Reggio Calabria, Italy
Jussi Sopanen, Lappeenranta University of Technology, Finland
Stefano Sorace, University of Udine, Italy
Andrea Spaggiari, University of Modena and Reggio Emilia, Italy
Lei Su, School of Mechanical Engineering, Jiangnan University, China
Shuaishuai Sun, University of Wollongong, Australia
Fidelis Tawiah Suorineni, School of Mining and Geosciences Nazarbayev University , Kazakhstan
Cecilia Surace, Politecnico di Torino, Italy
Tomasz Szolc, Polish Academy of Sciences, Poland
Iacopo Tamellin, University of Padova, Italy
Zhuhua Tan, Hebei University of Technology, China
Gang Tang, School of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, China
Chao Tao, Nanjing University , China
Tianyou Tao, Southeast University, China
Marco Tarabini, Politecnico di Milano, Italy
Gloria Terenzi, Universita degli Studi di Firenze, Italy
Hamid Toopchi-Nezhad, Razi University, Iran
Carlo Trigona, Università degli Studi di Catania, Italy
Federica Tubino, University of Genoa, Italy
Nerio Tullini, University of Ferrara, Italy
Filippo Ubertini, University of Perugia, Italy
Nicolò Vaiana, University of Naples Federico II, Italy
Marcello Vanali, Università degli Studi di Parma, Italy
Christian Vanhille, ESCET Universidad Rey Juan Carlos , Spain
F. Viadero, The University of Cantabria, Spain
M. Ahmer Wadee, Imperial College London, United Kingdom
C. M. Wang, University of Queensland, Australia
Gaoxin Wang, State Key Laboratory for Geomechanics and Deep Underground Engineering China University of Mining and Technology , China
Huiqi Wang, Chongqing University, China
Pengfei Wang, Taiyuan University of Technology, College of Mining Engineering, Shanxi 030024, Shanxi Province Research Center of Green Mining Engineering Technology, Shanxi 030024,, China
Weiqiang Wang, Research associate, University of Technology Sydney, Australia
Xian-Bo Wang, Zhejiang University, China
YuRen Wang, Key Laboratory of Microgravity (National Microgravity Laboratory), Institute of Mechanics Chinese Academy of Sciences , China
Wai-on Wong, Mechanical Engineering Department The Hong Kong Polytechnic University, Hong Kong
Bangbiao Wu, Tianjin University, China
Yuanping XU, Nanjing University of Aeronautics and Astronautics, China
Tang-Bin Xia, Shanghai Jiao Tong University, China
Biao Xiang, Xidian University, China
Qilong Xue, China University of Geosciences, China
Xin Xue, Fuzhou University, China
Diansen Yang, Institute of Rock and Soil Mechanics, CAS, China
Jie Yang, RMIT University, Australia
Chang-Ping Yi, Division of Mining and Geotechnical Engineering, Luleå University of Technology, Sweden, Sweden
Junyan Yi, School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, China
Nicolo Zampieri, Politecnico di Torino Italy, Italy
Chao-Ping Zang, Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, China
Enrico Zappino, Politecnico di Torino, Italy
Guo-Qing Zhang, Shenzhen University, China
Hong Zhang, Harbin Engineering University, China
Shaojian Zhang, Nanchang University, China
W. Zhang, Nanjing University, China
Yongfang Zhang, Xi'an University of Technology, China
Yaobing Zhao, Huaqiao University, China
Zhipeng Zhao, Tohoku University, Japan
Changjie Zheng, Hohai University, China
Chuanbo Zhou, aulty of Engineering, China University of Geosciences, Wuhan, Hubei, China
Hongwei Zhou, China University of Mining and Technology (Beijing) , China
Hongyuan Zhou, Beijing University of Technology, China
Jiaxi Zhou, Hunan University, China
Yunlai Zhou, Xi'an Jiaotong University, China
Radoslaw Zimroz, Wroclaw University of Science and Technology, Poland

Submit

Author guidelines

Editorial board

Databases and indexing