Table of Contents Author Guidelines Submit a Manuscript
Research Article
Wireless Communications and Mobile Computing
Volume 2019, Article ID 2190612, 1 page
https://doi.org/10.1155/2019/2190612
Corrigendum

Corrigendum to “Analyzing Critical Failures in a Production Process: Is Industrial IoT the Solution?”

1King Saud University, College of Engineering, Department of Industrial Engineering, Riyadh 11421, Saudi Arabia
2School of Civil Engineering and Built Environment, Science and Engineering Faculty, Queensland University of Technology, Brisbane 4000, Australia

Correspondence should be addressed to Shafiq Ahmad; as.ude.usk@qifahsa

Received 10 April 2019; Accepted 18 April 2019; Published 30 October 2019

Copyright © 2019 Shafiq Ahmad et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


In the article titled “Analyzing Critical Failures in a Production Process: Is Industrial IoT the Solution?” [1], Dr. Moath Alatefi and Dr. Ammar Moohialdin were missing from the authors’ list.

Dr. Ammar Moohialdin conceived the idea, provided the data, and revised and commented on an earlier draft of the article. In addition, Dr. Moath Alatefi worked as a statistical consultant during the preparation and the revision of the article. The corrected authors’ list is shown above.

The acknowledgments section to be as: “The authors extend their appreciation to the Deanship of Scientific Research at King Saud University for funding this work through research group no. (RG- 1438-089).”.

References

  1. S. Ahmad, A. Badwelan, A. M. Ghaleb, A. Qamhan, and M. Sharaf, “Analyzing Critical Failures in a Production Process: Is Industrial IoT the Solution?” Wireless Communications and Mobile Computing, vol. 2018, Article ID 6951318, 12 pages, 2018. View at Publisher · View at Google Scholar