Table of Contents Author Guidelines Submit a Manuscript
Research Letters in Materials Science
Volume 2008, Article ID 238736, 4 pages
http://dx.doi.org/10.1155/2008/238736
Research Letter

Effect of Incorporating Nanoporous Metal Phosphate Materials on the Compressive Strength of Portland Cement

The Pacific Northwest National Laboratory, P.O. Box 999, K3-62 Richland, WA 99352, USA

Received 12 December 2007; Accepted 27 February 2008

Academic Editor: Steven Suib

Copyright © 2008 Dawn M. Wellman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Polarz and B. Smarsly, “Nanoporous materials,” Journal of Nanoscience and Nanotechnology, vol. 2, no. 6, pp. 581–612, 2002. View at Publisher · View at Google Scholar
  2. A. K. Cheetham, G. Férey, and T. Loiseau, “Open-framework inorganic materials,” Angewandte Chemie International Edition, vol. 38, no. 22, pp. 3268–3292, 1999. View at Publisher · View at Google Scholar
  3. D. M. Wellman, S. V. Mattigod, K. E. Parker, S. M. Heald, C. Wang, and G. E. Fryxell, “Synthesis of organically templated nanoporous tin(II/IV) phosphate for radionuclide and metal sequestration,” Inorganic Chemistry, vol. 45, no. 6, pp. 2382–2384, 2006. View at Publisher · View at Google Scholar · View at PubMed
  4. G. E. Fryxell, J. Liu, A. A. Hauser et al., “Design and synthesis of selective mesoporous anion traps,” Chemistry of Materials, vol. 11, no. 8, pp. 2148–2154, 1999. View at Publisher · View at Google Scholar
  5. G. E. Fryxell, J. Liu, and S. V. Mattigod, “Self-assembled monolayers on mesoporous supports (SAMMS)—an innovative environmental sorbent,” Materials Technology, vol. 14, no. 4, pp. 188–191, 1999. View at Google Scholar
  6. S. V. Mattigod, X. Feng, G. E. Fryxell, J. Liu, and M. Gong, “Separation of complexed mercury from aqueous wastes using self-assembled mercaptan on mesoporous silica,” Separation Science and Technology, vol. 34, no. 12, pp. 2329–2345, 1999. View at Publisher · View at Google Scholar
  7. S. V. Mattigod, G. E. Fryxell, X. Feng, and J. Liu, “Self-assembled monolayers on mesoporous supports for metal separation,” in Metal Separation Technologies Beyond 2000: Integrating Novel Chemistry with Processing, K. C. Liddell and D. J. Chaiko, Eds., pp. 71–80, The Minerals, Metals & Materials Society, Warrendale, Pa, USA, 1999. View at Google Scholar
  8. S. V. Mattigod, G. E. Fryxell, K. E. Parker, and Y. Lin, “Application of novel nanoporous sorbents for the removal of heavy metals, metalloids, and radionuclides,” in Trace Elements in the Environment: Biogeochemistry, Biotechnology, and Bioremediation, M. N. V. Prasad, K. S. Sajwan, and R. Naidu, Eds., pp. 369–380, chapter 19, Taylor and Francis, Boca Raton, Fla, USA, 2005. View at Google Scholar
  9. S. V. Mattigod, G. E. Fryxell, R. J. Serne, and K. E. Parker, “Evaluation of novel getters for adsorption of radioiodine from ground water and waste glass leachates,” Radiochimica Acta, vol. 91, no. 9, pp. 539–545, 2003. View at Publisher · View at Google Scholar
  10. J. Liu, G. E. Fryxell, S. V. Mattigod, T. S. Zemanian, Y. Shin, and L.-Q. Wang, “Synthesis and applications of functionalized nanoporous materials for specific adsorption,” in Nanoporoous Materials II, Studies in Surface Science and Catalysis, A. Sayari, M. Jaroniec, and T. J. Pinnavaia, Eds., vol. 129, pp. 729–738, Elsevier, Amsterdam, The Netherlands, 2000. View at Google Scholar
  11. R. Spence and C. Shi, Stabilization and Solidifcation of Hazardous, Radioactive, and Mixed Wastes, CRC Press, Boca Raton, Fla, USA, 2005.
  12. C. Shi, “Hydraulic cement systems for stabilization/solidification,” in Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes, R. Spence and C. Shi, Eds., pp. 49–78, chapter 4, CRC Press, Boca Raton, Fla, USA, 2005. View at Google Scholar
  13. Ş. Targan, A. Olgun, Y. Erdogan, and V. Sevinc, “Influence of natural pozzolan, colemanite ore waste, bottom ash, and fly ash on the properties of Portland cement,” Cement and Concrete Research, vol. 33, no. 8, pp. 1175–1182, 2003. View at Publisher · View at Google Scholar
  14. M. Cyr, P. Lawrence, and E. Ringot, “Efficiency of mineral admixtures in mortars: quantification of the physical and chemical effects of fine admixtures in relation with compressive strength,” Cement and Concrete Research, vol. 36, no. 2, pp. 264–277, 2006. View at Publisher · View at Google Scholar
  15. Specification for Concrete Encasement for Contact-Handled Category 3 Waste, 1998, Proceedings of Waste Management.
  16. ASTM C109/C109M-07, “Standard test method for compressive strength of hydraulic cement mortars (using 2 in. or [50 mm] cube specimens),” 2002, ASTM International, West Conshohocken, Pa, USA. View at Google Scholar
  17. J. Thomas and A. Ramaswamy, “Mechanical properties of steel fiber-reinforced concrete,” Journal of Materials in Civil Engineering, vol. 19, no. 5, pp. 385–392, 2007. View at Publisher · View at Google Scholar
  18. S. Ghosh, S. Bhattacharjya, and S. Chakraborty, “Compressive behaviour of short-fibre-reinforced concrete,” Magazine of Concrete Research, vol. 59, no. 8, pp. 567–574, 2007. View at Publisher · View at Google Scholar
  19. F. Altun, T. Haktanir, and K. Ari, “Effects of steel fiber addition on mechanical properties of concrete and RC beams,” Construction and Building Materials, vol. 21, no. 3, pp. 654–661, 2007. View at Publisher · View at Google Scholar
  20. A. Sivakumar and M. Santhanam, “Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres,” Cement and Concrete Composites, vol. 29, no. 8, pp. 603–608, 2007. View at Publisher · View at Google Scholar
  21. E. A. Avallone and T. Baumeister, III, Marks' Standard Handbook for Mechanical Engineers, McGraw-Hill, London, UK, 1996.