Properties Evolution during Transient Liquid Phase Sintering of PM Alumix 431

Table 1

Typical chemical composition and physical characteristic of Alumix 431.

Typical chemical composition
Material	Alloy	Cu%	Mg%	Si%	Zn%	Wax lubricant	ECKA aluminium
Alumix 431	AlZnMgCu	1.5	2.5	—	5.5	1.2	Remainder
Typical physical characteristic
Apparent density [g/cm³]	Tap density [g/cm³]		Flowability [s/50 g/5,0 mm]		Green strength [N/mm²]		Sieve Analys [%]
1.05	1.35		<30		8.0		<0.2 mm >97%