Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2010, Article ID 269537, 6 pages
http://dx.doi.org/10.1155/2010/269537
Research Article

Cellular Energy Absorbing TRIP-Steel/Mg-PSZ Composite: Honeycomb Structures Fabricated by a New Extrusion Powder Technology

1Institute for Materials Science, Freiberg University of Mining and Technology, Gustav-Zeuner Straße 5, 09596 Freiberg, Germany
2Institute for Materials Engineering, Freiberg University of Mining and Technology, Gustav-Zeuner Straße 5, 09596 Freiberg, Germany
3Institute for Ceramics, Glass and Construction Materials, Agricolastraße 17, Freiberg University of Mining and Technology, 09596 Freiberg, Germany
4Fraunhofer Institute for Ceramic Technologies and Systems, Winterbergstraße 28, 01277 Dresden, Germany

Received 26 March 2010; Revised 20 July 2010; Accepted 30 September 2010

Academic Editor: John W. Gillespie

Copyright © 2010 Ulrich Martin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. J. Gibson and M. F. Ashby, Cellular Solids—Structure & Properties, Cambridge University Press, Cambridge, UK, 1997.
  2. A. G. Mamalis, M. Robinson, D. E. Manolakos, G. A. Demosthenous, M. B. Ioannidis, and J. Carruthers, “Crashworthy capability of composite material structures,” Composite Structures, vol. 37, no. 2, pp. 109–134, 1997. View at Google Scholar · View at Scopus
  3. M. Pein, V. Laukart, D. G. Feldmann et al., “Concepts for energy absorbing support structures and appropriate materials,” in Proceedings of the 22nd International Congress of Aeronautical Sciences, Hamburg, Germany, 2006.
  4. M. Kiser, M. Y. He, and F. W. Zok, “Mechanical response of ceramic microballoon reinforced aluminum matrix composites under compressive loading,” Acta Materialia, vol. 47, no. 9, pp. 2685–2694, 1999. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Simančík, “Metallic foams—ultra light materials for structural applications,” Inzynieria, Materialowa, vol. 47, pp. 2685–2694, 1999. View at Google Scholar
  6. H. Zhao, I. Elnasri, and S. Abdennadher, “An experimental study on the behaviour under impact loading of metallic cellular materials,” International Journal of Mechanical Sciences, vol. 47, no. 4-5, pp. 757–774, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Rabiei, L. Vendra, N. Reese et al., “Processing and characterisation of a new composite metal foam,” in Proceedings of the 4th International Conference on Porous Metals and Metal Foaming Technology (MetFoam '05), pp. 369–374, Kyoto, Japan, 2005.
  8. B. P. Neville and A. Rabiei, “Composite metal foams processed through powder metallurgy,” Materials and Design, vol. 29, no. 2, pp. 388–396, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Park and S. R. Nutt, “PM synthesis and properties of steel foams,” Materials Science and Engineering A, vol. 288, no. 1, pp. 111–118, 2000. View at Google Scholar · View at Scopus
  10. J. Pflug, B. Vangrimde, I. Verpoest, P. Bratfisch, and D. Vandepitte, “Continuously produced honeycomb cores,” in Proceedings of the International SAMPE Symposium and Exhibition, vol. 48, pp. 602–611, May 2003. View at Scopus
  11. H. N. G. Wadley, “Multifunctional periodic cellular metals,” Philosophical Transactions of the Royal Society A, vol. 364, no. 1838, pp. 31–68, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. F. Côté, V. S. Deshpande, N. A. Fleck, and A. G. Evans, “The compressive and shear responses of corrugated and diamond lattice materials,” International Journal of Solids and Structures, vol. 43, no. 20, pp. 6220–6242, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. F. Côté, V. S. Deshpande, N. A. Fleck, and A. G. Evans, “The out-of-plane compressive behavior of metallic honeycombs,” Materials Science and Engineering A, vol. 380, no. 1, pp. 272–280, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. D. D. Radford, G. J. McShane, V. S. Deshpande, and N. A. Fleck, “Dynamic compressive response of stainless-steel square honeycombs,” Journal of Applied Mechanics, Transactions ASME, vol. 74, no. 4, pp. 658–667, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. W. E. Baker, T. C. Togami, and J. C. Weydert, “Static and dynamic properties of high-density metal honeycombs,” International Journal of Impact Engineering, vol. 21, no. 3, pp. 149–163, 1998. View at Google Scholar · View at Scopus
  16. Y. Guo, Y. Zhou, D. Li, X. Duan, and T. Lei, “Microstructure and performance of 2Y-PSZ/TRIP steel composites,” Journal of Materials Science and Technology, vol. 19, no. 2, pp. 137–140, 2003. View at Google Scholar · View at Scopus
  17. Y. Zhou, Y.-K. Guo, D.-B. Li, and X.-M. Duan, “Effects of load mode on mechanical properties of ZrO2(2Y)/TRIP steel composites,” Transactions of Nonferrous Metals Society of China, vol. 13, no. 5, pp. 1086–1091, 2003. View at Google Scholar · View at Scopus
  18. C. G. Aneziris, W. Schärfl, H. Biermann, and U. Martin, “Energy-absorbing TRIP-Steel/Mg-PSZ composite honeycomb structures based on ceramic extrusion at room temperature,” International Journal of Applied Ceramic Technology, vol. 6, no. 6, pp. 727–735, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. H. Biermann, U. Martin, C. G. Aneziris et al., “Microstructure and compression strength of novel TRIP-steel/Mg-PSZ composites,” Advanced Engineering Materials, vol. 11, no. 12, pp. 1000–1006, 2009. View at Publisher · View at Google Scholar
  20. C. G. Aneziris, W. Schärfl, and B. Ullrich, “Microstructure evaluation of Al2O2 ceramics with Mg-PSZ- and TiO2-additions,” Journal of the European Ceramic Society, vol. 27, no. 10, pp. 3191–3199, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. G. C. Jacob, J. F. Fellers, S. Simunovic, and J. M. Starbuck, “Energy absorption in polymer composites for automotive crashworthiness,” Journal of Composite Materials, vol. 36, no. 7, pp. 813–850, 2002. View at Publisher · View at Google Scholar · View at Scopus
  22. R. K. McFarland, “Hexagonal cell structures under post-buckling axial load,” AIAA Journal, vol. 1, no. 6, pp. 1380–1385, 1963. View at Google Scholar
  23. T. Wierzbicki, “Crushing analysis of metal honeycombs,” International Journal of Impact Engineering, vol. 1, no. 2, pp. 157–174, 1983. View at Google Scholar · View at Scopus
  24. K. R. F. Andrews, G. L. England, and E. Ghani, “Classification of the axial collapse of cylindrical tubes under quasi-static loading,” International Journal of Mechanical Sciences, vol. 25, no. 9-10, pp. 687–696, 1983. View at Google Scholar · View at Scopus
  25. Y. Jing, S. Guo, J. Han, Y. Zhang, and W. Li, “Fabrication and compressive performance of plain carbon steel honeycomb sandwich panels,” Journal of University of Science and Technology Beijing, vol. 15, no. 3, pp. 255–260, 2008. View at Publisher · View at Google Scholar · View at Scopus