Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2010, Article ID 820541, 9 pages
http://dx.doi.org/10.1155/2010/820541
Research Article

Use of Sawing Waste from Zeolitic Tuffs in the Manufacture of Ceramics

1Laboratorio Materiali, Dipartimento di Meccanica, Strutture, Ambiente e Territorio, Università di Cassino, Via G. Di Biasio 43, 03043 Cassino, Italy
2CISAG, Università Federico II, Via Mezzocannone 8, 80134 Napoli, Italy
3Dipartimento di Scienze della Terra, Università Federico II, Via Mezzocannone 8, 80134 Napoli, Italy
4Dipartimento di Studi Geologici e Ambientali, Università del Sannio, Via dei Mulini, 59/A, 82100 Benevento, Italy

Received 26 February 2010; Accepted 19 April 2010

Academic Editor: Luigi Nicolais

Copyright © 2010 M. Pansini et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

M. Pansini, R. de Gennaro, L. Parlato , et al., “Use of Sawing Waste from Zeolitic Tuffs in the Manufacture of Ceramics,” Advances in Materials Science and Engineering, vol. 2010, Article ID 820541, 9 pages, 2010. https://doi.org/10.1155/2010/820541.