Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2011, Article ID 509457, 7 pages
http://dx.doi.org/10.1155/2011/509457
Research Article

Low-Temperature Strengths and Ductility of Various Tungsten Sheets

1Department of Applied Physics, Okayama University of Science, 1-1 Ridai-cho, Okayama 700-0005, Japan
2International Research Center for Nuclear Materials Science, IMR, Tohoku University, Ibaraki, Oarai 311-1313, Japan

Received 18 March 2011; Accepted 6 June 2011

Academic Editor: Kin Ho Lo

Copyright © 2011 Yutaka Hiraoka and Hiroaki Kurishita. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. 8: Tungsten, in Behavior and Properties of Refractory Metals, T. E. Tietz and J. W. Wilson, Eds., pp. 274–330, University of Tokyo Press, Tokyo, Japan, 1965.
  2. Y. Hiraoka, S. Yoshimura, and K. Takebe, “Effects of complex additions of Re or Ti with C on the strength and ductility of recrystallized molybdenum,” International Journal of Refractory Metals and Hard Materials, vol. 12, no. 5, pp. 261–268, 1993. View at Google Scholar · View at Scopus
  3. S. Yoshimura, Y. Hiraoka, and K. Takebe, “Effect of Ti in solution on ductile-brittle transition characteristics of powder-metallurgy molybdenum alloys,” Journal of the Japan Institute of Metals, vol. 58, no. 7, pp. 734–739, 1994 (Japanese). View at Google Scholar · View at Scopus
  4. T. Hoshika, S. Yoshimura, and Y. Hiraoka, “Evaluation of low-temperature fracture characteristics of molybdenum by means of tensile tests and bend tests,” in Proceedings of the 14th intergranular Plansee Sem, pp. 1018–1025, Tirol, Austria, 1997.
  5. T. Kadokura, Y. Hiraoka, Y. Yamamoto, and K. Okamot, “Change of mechanical property and fracture mode of molybdenum by carbon addition,” Materials Transactions, vol. 51, no. 7, pp. 1296–1301, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. N. J. Petch, “The cleavage strength of polycrystals,” The Journal of the Iron and Steel Institute, vol. 173, pp. 25–27, 1953. View at Google Scholar
  7. S. W. H. Yih and C. T. Wang, Tungsten- Sources, Metallurgy, Properties, and Applications, Plenum, New York, NY, USA, 1977.
  8. Y. Hiraoka, “Significant effect of carbon content in the low-temperature fracture behavior of molybdenum,” Materials Transactions, vol. 31, no. 10, pp. 861–864, 1990. View at Google Scholar · View at Scopus