Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2012, Article ID 418729, 9 pages
Research Article

Rock Mechanical Property Influenced by Inhomogeneity

State Key Laboratory of Mine Disaster Prevention and Control, Shandong University of Science and Technology, Shandong, Qingdao 266590, China

Received 26 March 2012; Revised 6 April 2012; Accepted 10 April 2012

Academic Editor: Amit Bandyopadhyay

Copyright © 2012 Yunliang Tan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [5 citations]

The following is the list of published articles that have cited the current article.

  • Yanchun Yin, and Dongmei Huang, “Inhomogeneous Micro-Structure Influence on Macro-Crack of Sandstone,” Journal of Testing and Evaluation, vol. 41, no. 6, pp. 1024–1031, 2013. View at Publisher · View at Google Scholar
  • Zaobao Liu, Jianfu Shao, Weiya Xu, and Chong Shi, “Estimation of Elasticity of Porous Rock Based on Mineral Composition and Microstructure,” Advances in Materials Science and Engineering, vol. 2013, pp. 1–10, 2013. View at Publisher · View at Google Scholar
  • Yun-liang Tan, Wei-yao Guo, Qing-heng Gu, Tong-bin Zhao, Feng-hai Yu, Shan-chao Hu, and Yan-chun Yin, “Research on the Rockburst Tendency and AE Characteristics of Inhomogeneous Coal-Rock Combination Bodies,” Shock and Vibration, vol. 2016, pp. 1–11, 2016. View at Publisher · View at Google Scholar
  • Weijian Yu, Genshui Wu, Baifu An, and Ping Wang, “Experimental Study on the Brittle-Ductile Response of a Heterogeneous Soft Coal Rock Mass under Multifactor Coupling,” Geofluids, vol. 2019, pp. 1–15, 2019. View at Publisher · View at Google Scholar
  • Dongmei Huang, Yanchun Yin, Xikun Chang, Yunliang Tan, and Kai Fang, “From rock microstructure to macromechanical properties based on fractal dimensions,” Advances in Mechanical Engineering, vol. 11, no. 3, 2019. View at Publisher · View at Google Scholar