Advances in Materials Science and Engineering

Table of Contents: 2012

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 124820
  • - Research Article

Optical and Physical Properties of Methyltrimethoxysilane Transparent Film Incorporated with Nanoparticles

W. Ahliah Ismail | Zainal Abidin Ali | R. Puteh
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 258673
  • - Research Article

Simple Method to Synthesize Functionalized Carbon Nanotubes Employing Cobalt Nitrate and Acetone by Using Spray Pyrolysis Deposition Technique

Jorge A. Gómez | Alfredo Marquez | ... | A. Duarte-Moller
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 629802
  • - Research Article

Corrosion of Mechanically Alloyed Nanostructured FeAl Intermetallic Powders

A. Torres-Islas | C. Carachure | ... | G. Rosas
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 872597
  • - Research Article

Luminescence and Structure of ZnO Grown by Physical Vapor Deposition

R. García-Gutiérrez | M. Barboza-Flores | ... | O. E. Contreras-López
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2012
  • - Article ID 186948
  • - Editorial

Photocatalytic Materials

Guohua Jiang | Tao Chen | Qiang Yang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2012
  • - Article ID 956561
  • - Editorial

Solar Energy: Materials, Devices, and Applications

Ru-Yuan Yang | Yu-Pei Huang | ... | Fengqiang Sun
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 518392
  • - Research Article

The Influence of Hydroxylated Carbon Nanotubes on Epoxy Resin Composites

Jiaoxia Zhang | Yaping Zheng | ... | Jun Zou
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 635693
  • - Research Article

Processing and Characterization of High Density Polyethylene/Ethylene Vinyl Acetate Blends with Different VA Contents

Othman Y. Alothman
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 904354
  • - Research Article

Cholesteric Liquid Crystalline Copolymers for Gas Chromatographic Separation of Polycyclic Aromatic Compounds

Chih-Hung Lin
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 520967
  • - Research Article

Integral Solution of the Interface Profile of Grain Boundary Grooving by Surface Diffusion

Caifang Wang | Hui Xing | ... | Fei Fan
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2012
  • - Article ID 136092
  • - Research Article

Segregation of Cu-In-S Elements in the Spray-Pyrolysis-Deposited Layer of CIS Solar Cells

Seigo Ito | Toshihiro Ryo
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 345214
  • - Research Article

Experimental Study on the Compressive Strength of Big Mobility Concrete with Nondestructive Testing Method

Huai-Shuai Shang | Ting-Hua Yi | Lu-Sheng Yang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 640497
  • - Research Article

Magnetic Forces Investigation of Bulk HTS over Permanent Magnetic Guideway under Different Lateral Offset with 3D-Model Numerical Method

Yiyun Lu | Qiaohong Dang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 901658
  • - Research Article

Performance Evaluation of Warm- and Hot-Mix Asphalt Mixtures Based on Laboratory and Accelerated Pavement Tests

Yongjoo Kim | Jaejun Lee | ... | Youngchan Suh
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2012
  • - Article ID 346280
  • - Research Article

Development of Alternative Glass Ceramic Seal for a Planar Solid Oxide Fuel Cell

P. Lemes-Rachadel | H. Birol | ... | D. Hotza
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate33%
Submission to final decision71 days
Acceptance to publication29 days
CiteScore2.000
Impact Factor1.271
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.