Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2012 (2012), Article ID 724126, 8 pages
http://dx.doi.org/10.1155/2012/724126
Research Article

The Comparison of Biocompatibility Properties between Ti Alloys and Fluorinated Diamond-Like Carbon Films

1Department of Mechanical Engineering, King Mongkut's University of Technology Thonburi, 126 Pracha-Utid Road, Bangmod, Tungkru, Bangkok 10140, Thailand
2Department of Tool and Materials Engineering, King Mongkut's University of Technology Thonburi, 126 Pracha-Utid Road, Bangmod, Tungkru, Bangkok 10140, Thailand
3Biological Engineering Program, King Mongkut's University of Technology Thonburi, 126 Pracha-Utid Road, Bangmod, Tungkru, Bangkok 10140, Thailand
4Department of Systems Engineering, Nippon Institute of Technology, 4-1 Gakuendai, Miyashiro Machi, Saitama 345-8501, Japan

Received 6 December 2011; Revised 20 February 2012; Accepted 20 February 2012

Academic Editor: Amit Bandyopadhyay

Copyright © 2012 Chavin Jongwannasiri et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. D. Maguire, J. A. McLaughlin, T. I. T. Okpalugo et al., “Mechanical stability, corrosion performance and bioresponse of amorphous diamond-like carbon for medical stents and guidewires,” Diamond and Related Materials, vol. 14, no. 8, pp. 1277–1288, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. P. Firkins, J. L. Hailey, J. Fisher, A. H. Lettington, and R. Butter, “Wear of ultra-high molecular weight polyethylene against damaged and undamaged stainless steel and diamond-like carbon-coated counterfaces,” Journal of Materials Science, vol. 9, no. 10, pp. 597–601, 1998. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Mohanty, T. V. Anilkumar, P. V. Mohanan et al., “Long term tissue response to titanium coated with diamond like carbon,” Biomolecular Engineering, vol. 19, no. 2–6, pp. 125–128, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. T. V. Kumari, P. R. A. Kumar, C. V. Muraleedharan et al., “In vitro cytocompatibility studies of Diamond Like Carbon coatings on titanium,” Bio-Medical Materials and Engineering, vol. 12, no. 4, pp. 329–338, 2002. View at Google Scholar · View at Scopus
  5. M. I. Jones, I. R. McColl, D. M. Grant, K. G. Parker, and T. L. Parker, “Haemocompatibility of DLC and TiC-TiN interlayers on titanium,” Diamond and Related Materials, vol. 8, no. 2–5, pp. 457–462, 1999. View at Google Scholar · View at Scopus
  6. M. I. Jones, I. R. McColl, D. M. Grant, K. G. Parker, and T. L. Parker, “Protein adsorption and platelet attachment and activation, on TiN, TiC, and DLC coatings on titanium for cardiovascular applications,” Journal of Biomedical Materials Research, vol. 52, no. 2, pp. 413–421, 2000. View at Google Scholar · View at Scopus
  7. N. Nurdin, P. François, Y. Mugnier et al., “Haemocompatibility evaluation of DLC- and SiC-coated surfaces,” European Cells and Materials, vol. 5, pp. 17–28, 2003. View at Google Scholar · View at Scopus
  8. T. I. T. Okpalugo, A. A. Ogwu, P. D. Maguire, and J. A. D. McLaughlin, “Platelet adhesion on silicon modified hydrogenated amorphous carbon films,” Biomaterials, vol. 25, no. 2, pp. 239–245, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. P. Yang, N. Huang, Y. X. Leng et al., “Activation of platelets adhered on amorphous hydrogenated carbon (a-C:H) films synthesized by plasma immersion ion implantation-deposition (PIII-D),” Biomaterials, vol. 24, no. 17, pp. 2821–2829, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. J. A. McLaughlin, B. Meenan, P. Maguire, and N. Jamieson, “Properties of diamond like carbon thin film coatings on stainless steel medical guidewires,” Diamond and Related Materials, vol. 5, no. 3–5, pp. 486–491, 1996. View at Google Scholar · View at Scopus
  11. R. S. Benson, “Use of radiation in biomaterials science,” Nuclear Instruments and Methods in Physics Research, Section B, vol. 191, no. 1–4, pp. 752–757, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. C. Donnet, “Recent progress on the tribology of doped diamond-like and carbon alloy coatings: a review,” Surface and Coatings Technology, vol. 100-101, no. 1–3, pp. 180–186, 1998. View at Google Scholar
  13. R. S. Butter, D. R. Waterman, A. M. Lettington, R. T. Ramos, and E. J. Fordham, “Production and wetting properties of fluorinated diamond-like carbon coatings,” Thin Solid Films, vol. 311, no. 1-2, pp. 107–113, 1997. View at Google Scholar · View at Scopus
  14. T. Saito, T. Hasebe, S. Yohena et al., “Antithrombogenicity of fluorinated diamond-like carbon films,” Diamond and Related Materials, vol. 14, no. 3–7, pp. 1116–1119, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. T. Hasebe, S. Yohena, A. Kamijo et al., “Fluorine doping into diamond-like carbon coatings inhibits protein adsorption and platelet activation,” Journal of Biomedical Materials Research, vol. 83, no. 4, pp. 1192–1199, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Hasebe, A. Shimada, T. Suzuki et al., “Fluorinated diamond-like carbon as antithrombogenic coating for blood-contacting devices,” Journal of Biomedical Materials Research, vol. 76, no. 1, pp. 86–94, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. T. Hasebe, S. Nagashima, A. Kamijo et al., “Depth profiling of fluorine-doped diamond-like carbon (F-DLC) film: localized fluorine in the top-most thin layer can enhance the non-thrombogenic properties of F-DLC,” Thin Solid Films, vol. 516, no. 2–4, pp. 299–303, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. A. C. Ferrari and J. Robertson, “Interpretation of Raman spectra of disordered and amorphous carbon,” Physical Review B, vol. 61, no. 20, pp. 14095–14107, 2000. View at Google Scholar · View at Scopus
  19. A. C. Ferrari and J. Robertson, “Resonant raman spectroscopy of disordered, amorphous, and diamondlike carbon,” Physical Review B, vol. 64, no. 7, Article ID 075414, 13 pages, 2001. View at Google Scholar
  20. S. Piscanec, M. Lazzeri, F. Mauri, A. C. Ferrari, and J. Robertson, “Kohn anomalies and electron-phonon interactions in graphite,” Physical Review Letters, vol. 93, no. 18, Article ID 185503, 4 pages, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Kitazaki and T. Hata, “Surface-chemical criteria for optimum adhesion,” The Journal of Adhesion, vol. 4, no. 2, pp. 123–132, 1972. View at Google Scholar
  22. T. Hata, Y. Kitazaki, and T. Saito, “Estimation of the surface energy of polymer solids,” The Journal of Adhesion, vol. 21, no. 3-4, pp. 177–194, 1987. View at Google Scholar
  23. C. Jongwannasiri, A. Khantachawana, P. Kaewtatip, N. Moolsradoo, and S. Watanabe\, “Fluorinated diamond-like carbon coatings by plasma based ion implantation for biomedical application,” in Proceedings of the 2nd Biomedical Engineering International Conference (BMEiCON '09), pp. 286–290, Club Andaman Beach Resort, Phuket, Thailand, August 2009.
  24. M. A. Capano, N. T. McDevitt, R. K. Singh, and F. Qian, “Characterization of amorphous carbon thin films,” Journal of Vacuum Science and Technology A, vol. 14, no. 2, pp. 431–435, 1996. View at Google Scholar · View at Scopus
  25. J. Qi, J. B. Luo, S. Z. Wen, J. Wang, and W. Z. Li, “Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD,” Surface and Coatings Technology, vol. 128-129, pp. 324–328, 2000. View at Publisher · View at Google Scholar
  26. F. L. Freire Jr., G. Mariotto, R. S. Brusa, A. Zecca, and C. A. Achete, “Structural characterization of amorphous hydrogenated carbon and carbon nitride films deposited by plasma-enhanced CVD,” Diamond and Related Materials, vol. 4, no. 4, pp. 499–502, 1995. View at Google Scholar · View at Scopus
  27. M. Ishihara, T. Kosaka, T. Nakamura et al., “Antibacterial activity of fluorine incorporated DLC films,” Diamond and Related Materials, vol. 15, no. 4–8, pp. 1011–1014, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. G. Q. Yu, B. K. Tay, Z. Sun, and L. K. Pan, “Properties of fluorinated amorphous diamond like carbon films by PECVD,” Applied Surface Science, vol. 219, no. 3-4, pp. 228–237, 2003. View at Publisher · View at Google Scholar
  29. A. Bendavid, P. J. Martin, L. Randeniya, and M. S. Amin, “The properties of fluorine containing diamond-like carbon films prepared by plasma-enhanced chemical vapour deposition,” Diamond and Related Materials, vol. 18, no. 1, pp. 66–71, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. R. K. Roy, H. W. Choi, J. W. Yi et al., “Hemocompatibility of surface-modified, silicon-incorporated, diamond-like carbon films,” Acta Biomaterialia, vol. 5, no. 1, pp. 249–256, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. N. Moolsradoo and S. Watanabe, “Modification of tribological performance of DLC films by means of some elements addition,” Diamond and Related Materials, vol. 19, no. 5-6, pp. 525–529, 2010. View at Publisher · View at Google Scholar · View at Scopus
  32. Z. Q. Yao, P. Yang, N. Huang, H. Sun, and J. Wang, “Structural, mechanical and hydrophobic properties of fluorine-doped diamond-like carbon films synthesized by plasma immersion ion implantation and deposition (PIII-D),” Applied Surface Science, vol. 230, no. 1–4, pp. 172–178, 2004. View at Publisher · View at Google Scholar
  33. J. Hong, K. Nilsson Ekdahl, H. Reynolds, R. Larsson, and B. Nilsson, “A new in vitro model to study interaction between whole blood and biomaterials. Studies of platelet and coagulation activation and the effect of aspirin,” Biomaterials, vol. 20, no. 7, pp. 603–611, 1999. View at Publisher · View at Google Scholar · View at Scopus
  34. C. L. Haycox and B. D. Ratner, “In vitro platelet interactions in whole human blood exposed to biomaterial surfaces: insights on blood compatibility,” Journal of Biomedical Materials Research, vol. 27, no. 9, pp. 1181–1193, 1993. View at Google Scholar · View at Scopus
  35. J. M. Grunkemeier, W. B. Tsai, C. D. McFarland, and T. A. Horbett, “The effect of adsorbed fibrinogen, fibronectin, von Willebrand factor and vitronectin on the procoagulant state of adherent platelets,” Biomaterials, vol. 21, no. 22, pp. 2243–2252, 2000. View at Publisher · View at Google Scholar · View at Scopus
  36. W. J. Ma, A. J. Ruys, R. S. Mason et al., “DLC coatings: effects of physical and chemical properties on biological response,” Biomaterials, vol. 28, no. 9, pp. 1620–1628, 2007. View at Publisher · View at Google Scholar · View at Scopus
  37. J. L. Bohnert and T. A. Horbett, “Changes in adsorbed fibrinogen and albumin interactions with polymers indicated by decreases in detergent elutability,” Journal of Colloid And Interface Science, vol. 111, no. 2, pp. 363–377, 1986. View at Google Scholar · View at Scopus
  38. I. Dion, X. Roques, C. Baquey, E. Baudet, B. B. Cathalinat, and N. More, “Hemocompatibility of Diamond-like Carbon coating,” Biomedical Materials and Engineering, vol. 3, no. 1, pp. 51–55, 1993. View at Google Scholar · View at Scopus
  39. I. Dion, C. Baquey, B. Candelon, and J. R. Monties, “Hemocompatibility of titanium nitride,” International Journal of Artificial Organs, vol. 15, no. 10, pp. 617–621, 1992. View at Google Scholar · View at Scopus
  40. B. D. Ratner, “Blood compatibility—a perspective,” Journal of Biomaterials Science, Polymer Edition, vol. 11, no. 11, pp. 1107–1119, 2000. View at Publisher · View at Google Scholar · View at Scopus
  41. S. L. Goodman, S. L. Cooper, and R. M. Albrecht, “The effects of substrate-adsorbed albumin on platelet spreading,” Journal of Biomaterials Science, Polymer Edition, vol. 2, no. 2, pp. 147–159, 1991. View at Google Scholar · View at Scopus
  42. A. L. Kaganov, J. Stamberg, and P. Synek, “Hydrophilized polyethylene catheters,” Journal of Biomedical Materials Research, vol. 10, no. 1, pp. 1–7, 1976. View at Google Scholar
  43. K. Park and S. L. Cooper, “Importance of composition of the initial protein layer and platelet spreading in acute surface-induced thrombosis,” Transactions of the American Society for Artificial Internal Organs, vol. 31, pp. 483–488, 1985. View at Google Scholar · View at Scopus
  44. T. Duerig, A. Pelton, and D. Stöckel, “An overview of nitinol medical applications,” Materials Science and Engineering A, vol. 273–275, pp. 149–160, 1999. View at Google Scholar · View at Scopus
  45. J. H. Sui and W. Cai, “Mechanical and corrosion study of diamond-like carbon coating on NiTi alloys,” Surface and Coatings Technology, vol. 201, no. 9–11, pp. 5121–5123, 2007. View at Publisher · View at Google Scholar · View at Scopus
  46. D. J. Wever, A. G. Veldhuizen, J. De Vries, H. J. Busscher, D. R. A. Uges, and J. R. Van Horn, “Electrochemical and surface characterization of a nickel-titanium alloy,” Biomaterials, vol. 19, no. 7–9, pp. 761–769, 1998. View at Publisher · View at Google Scholar · View at Scopus
  47. C. Trepanier, M. Tabrizian, L'H. Yahia, L. Bilodeau, and D. L. Piron, “Improvement of the corrosion resistance of NiTi stents by surface treatments,” Materials Research Society Symposia Proceedings, vol. 459, pp. 363–368, 1997. View at Google Scholar
  48. J. Lausmaa, L. Mattsson, U. Rolander, and B. Kasemo, “Chemical composition and morphology of titanium surface oxides,” Materials Research Society Symposia Proceedings, vol. 55, pp. 351–359, 1986. View at Google Scholar