Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 1053856, 12 pages
Research Article

Experimental Study on Detection of Deterioration in Concrete Using Infrared Thermography Technique

1Department of Ocean Civil Engineering, Chonnam National University, Yeosu 59626, Republic of Korea
2Department of Civil Engineering, Daegu University, Gyeongsan, Gyeongbuk 38453, Republic of Korea
3Department of Civil Engineering, Gyeongnam National University of Science and Technology, Jinju, Gyeongnam 52725, Republic of Korea
4Department of Civil & Construction Engineering, Oregon State University, Corvallis, OR 97331, USA

Received 4 March 2016; Accepted 30 March 2016

Academic Editor: Velu Saraswathy

Copyright © 2016 Jungwon Huh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C.-C. Cheng, T.-M. Cheng, and C.-H. Chiang, “Defect detection of concrete structures using both infrared thermography and elastic waves,” Automation in Construction, vol. 18, no. 1, pp. 87–92, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. IAEA, Guidebook on Non-Destructive Testing of Concrete Structures, IAEA in Austria, 2002.
  3. Transportation Research Board, “Nondestructive testing to identify concrete bridge deck deterioration,” SHRP2 Renewal Research S2-R06A-RR-1, 2013. View at Google Scholar
  4. D. G. Pollock, K. J. Dupuis, B. Lacour, and K. R. Olsen, “Detection of voids in prestressed concrete bridges using thermal imaging and ground-penetrating radar,” WSDOT Research Report, 2008. View at Google Scholar
  5. X. P. V. Maldague, Nondestructive Evaluation of Materials by Infrared Thermography, Springer, New York, NY, USA, 1993.
  6. K. Vaghefi, H. A. De Melo e Silva, D. K. Harris, and T. M. Ahlborn, “Application of thermal IR imagery for concrete bridge inspection,” in Proceedings of the PCI National Bridge Conference (PCI/NBC '11), Precast/Prestressed Concrete Institute, Salt Lake City, UT, USA, 2011.
  7. T. M. Ahlborn and C. N. Brooks, Evaluation of Bridge Decks using Non-Destructive Evaluation (NDE) at Near Highway Speeds for Effective Asset Management, Michigan Technological University and Michigan Department of Transportation, Houghton, Mich, USA, 2015.
  8. K. Vaghefi, Infrared Thermography Enhancements for Concrete Bridge Evaluation, Michigan Technological University, Houghton, Mich, USA, 2013.
  9. P. Cielo, X. Maldague, A. A. Deom, and R. Lewak, “Thermographic nondestructive evaluation of industrial materials and structures,” Materials Evaluation, vol. 14, pp. 452–460, 1987. View at Google Scholar
  10. R. Usamentiaga, P. Venegas, J. Guerediaga, L. Vega, J. Molleda, and F. G. Bulnes, “Infrared thermography for temperature measurement and non-destructive testing,” Sensors, vol. 14, no. 7, pp. 12305–12348, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Vollmer and K. P. Mollmann, Infrared Thermal Imaging-Fundamentals, Research and Applications, Viley-VCH, Weinheim, Germany, 2010.
  12. G. C. Holst, Common Sense Approach to Thermal Imaging, Spie Optical Engineering Press, Bellingham, Wash, USA, 2000.
  13. FLIR, The Ultimate Infrared Handbook for R&D Professionals, FLIR Systems, Wilsonville, Ore, USA, 2012.
  14. K. J. Dupuis, Nondestructive Testing of Concrete Box Girder Bridges Using Thermal Imaging, Washington State University, Pullman, Wash, USA, 2008.
  15. J. F. Lamond and J. H. Pielert, Significance of Tests and Properties of Concrete and Concrete-making Materials, ASTM International, West Conshohocken, Pa, USA, 2006.
  16. FLIR SC660 Catalog, Technical Data of FLIR SC660 Infrared Camera, FLIR Systems, Wilsonville, Ore, USA, 2014.
  17. ACI, Report on Nondestructive Test Methods for Evaluation of Concrete in Structures, American Concrete Institute, Farmington, Mich, USA, 2013.
  18. ASTM, “Standard test method for detecting delaminations in bridge decks using infrared thermography,” ASTM D4788-07, ASTM International, 2007. View at Google Scholar