Advances in Materials Science and Engineering

Table of Contents: 2016

  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 3740517
  • - Research Article

Electrical Characterization of Postmetal Annealed Ultrathin TiN Gate Electrodes in Si MOS Capacitors

Z. N. Khan | S. Ahmed | M. Ali
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 9265195
  • - Review Article

Properties and Microstructures of Sn-Bi-X Lead-Free Solders

Fan Yang | Liang Zhang | ... | Li Bao
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 9624974
  • - Research Article

Properties of Crushed Red-Bed Soft Rock Mixtures Used in Subgrade

Huayan Yao | Shanpo Jia | ... | Kunlin Lu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 2681038
  • - Research Article

Experimental and Stress-Strain Equation Investigation on Compressive Strength of Raw and Modified Soil in Loess Plateau

Youchao Zhang | Yihong Wang | ... | Tianya Wang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 7320439
  • - Editorial

Advances in Building Technologies and Construction Materials 2016

J. M. P. Q. Delgado | Robert Černý | ... | A. S. Guimarães
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 3410637
  • - Research Article

System Safety Assessment Based on Past Incidents in Oil and Gas Industries: A Focused Approach in Forecasting of Minor, Severe, Critical, and Catastrophic Incidents, 2010–2015

Praveen Patel | Nagendra Sohani
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 4730616
  • - Research Article

Chloride Transport of High Alumina Cement Mortar Exposed to a Saline Solution

Hee Jun Yang | Sung Ho Jin | Ki Yong Ann
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 7982365
  • - Research Article

Bearing Capacities of Different-Diameter Concrete-Filled Steel Tubes under Axial Compression

Wenjing Wang | Zhenyun Tang | ... | Hua Ma
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 3824835
  • - Research Article

Prediction of Chloride Diffusion in Concrete Structure Using Meshless Methods

Ling Yao | Xiaolu Li | ... | Lingling Zhang
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 7529382
  • - Research Article

Simulated Experiment Study of Factors Influencing the Hydration Activity of f-CaO in Basic Oxygen Furnace Slag

Ruiquan Jia | Jiaxiang Liu
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 9507852
  • - Research Article

Effect of Filling Interval Time on Long-Term Mechanical Strength of Layered Cemented Tailing Backfill

Shuai Cao | Wei-dong Song
  • Advances in Materials Science and Engineering -
  • Special Issue
  • - Volume 2016
  • - Article ID 4710752
  • - Research Article

Structural Phenomenon of Cement-Based Composite Elements in Ultimate Limit State

I. Iskhakov | Y. Ribakov
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 7254823
  • - Research Article

Cement-Based Renders Manufactured with Phase-Change Materials: Applications and Feasibility

Luigi Coppola | Denny Coffetti | Sergio Lorenzi
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 1750105
  • - Research Article

Electropolished Titanium Implants with a Mirror-Like Surface Support Osseointegration and Bone Remodelling

Cecilia Larsson Wexell | Furqan A. Shah | ... | Peter Thomsen
  • Advances in Materials Science and Engineering -
  • Special Issue
  • Volume 2016
  • - Article ID 8219437
  • - Research Article

Olive Stone Ash as Secondary Raw Material for Fired Clay Bricks

D. Eliche-Quesada | M. A. Felipe-Sesé | A. Infantes-Molina
Advances in Materials Science and Engineering
 Journal metrics
Acceptance rate31%
Submission to final decision86 days
Acceptance to publication37 days
CiteScore1.370
Impact Factor1.399
 Submit