Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 1276596, 13 pages
http://dx.doi.org/10.1155/2016/1276596
Research Article

A Numerical Modelling Approach for Time-Dependent Deformation of Hot Forming Tools under the Creep-Fatigue Regime

DIN Department, University of Bologna, Viale Risorgimento 2, 40136 Bologna, Italy

Received 31 January 2016; Accepted 10 July 2016

Academic Editor: Jun Liu

Copyright © 2016 B. Reggiani et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

B. Reggiani, L. Donati, and L. Tomesani, “A Numerical Modelling Approach for Time-Dependent Deformation of Hot Forming Tools under the Creep-Fatigue Regime,” Advances in Materials Science and Engineering, vol. 2016, Article ID 1276596, 13 pages, 2016. doi:10.1155/2016/1276596