Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 1374897, 12 pages
http://dx.doi.org/10.1155/2016/1374897
Research Article

Anodisation of Aluminium Alloys by Micro-Capillary Technique as a Tool for Reliable, Cost-Efficient, and Quick Process Parameter Determination

1Materials and Surface Engineering Group, Technische Universität Chemnitz, 09107 Chemnitz, Germany
2Center of Engineering Materials, State Materials Testing Institute Darmstadt (MPA), Chair and Institute for Materials Science (IfW), Technische Universität Darmstadt, 64283 Darmstadt, Germany
3Composite Materials Group, Technische Universität Chemnitz, 09107 Chemnitz, Germany

Received 20 September 2015; Revised 25 January 2016; Accepted 7 February 2016

Academic Editor: Gianluca Percoco

Copyright © 2016 Daniela Nickel et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Daniela Nickel, Dagmar Dietrich, Roy Morgenstern, Ingolf Scharf, Harry Podlesak, and Thomas Lampke, “Anodisation of Aluminium Alloys by Micro-Capillary Technique as a Tool for Reliable, Cost-Efficient, and Quick Process Parameter Determination,” Advances in Materials Science and Engineering, vol. 2016, Article ID 1374897, 12 pages, 2016. https://doi.org/10.1155/2016/1374897.