Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 2372835, 10 pages
Research Article

Calculation of Constrained Stress in Expansive Mortar with a Composite Creep Model

1Graduate School of Engineering, Muroran Institute of Technology, 27-1 Mizumoto-cho, Muroran, Hokkaido 080-8585, Japan
2Slag Utilization Research Team, Research Institute of Industrial Science & Technology, 32 Hyoja-dong, Nam-ku, Pohang 37673, Republic of Korea

Received 26 February 2016; Revised 11 May 2016; Accepted 29 May 2016

Academic Editor: Antônio G. de Lima

Copyright © 2016 Hyeonggil Choi and Bongsuk Cho. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. AIJ (Architectural Institute of Japan), Recommendations for Practice of Crack Control in Reinforced Concrete Buildings (Design and Construction), AIJ, 2006.
  2. ACI, “Standard practice for the use of shrinkage compensating concrete,” ACI Manual of Concrete Practice ACI 223R-98, 1993. View at Google Scholar
  3. JCI C77, Proceedings of JCI Symposium on Evaluation of Concrete Shrinkage and Its Effect, Japan Concrete Institute, Tokyo, Japan, 2010.
  4. ACI Committe, Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete, ACI Committe 209, 2008.
  5. R. I. Gilbert, Time-Effects in Concrete Structures, Elsevier Science, Amsterdam, The Netherlands, 1988.
  6. A. M. Neville, Creep of Concrete: Plain, Reinforced and Pre-Stressed, North Holland Publishing Company, Amsterdam, Netherlands, 1970.
  7. M. Morioka, Hydration and material design of cement-based expansive additive [Ph.D. thesis], Tokyo Institute of Technology, Tokyo, Japan, 1999.
  8. P. Carballosa, J. L. García Calvo, D. Revuelta, J. J. Sánchez, and J. P. Gutiérrez, “Influence of cement and expansive additive types in the performance of self-stressing and self-compacting concretes for structural elements,” Construction and Building Materials, vol. 93, pp. 223–229, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Higuchi, M. Eguchi, M. Morioka, and E. Sakai, “Hydration and properties of expansive additive treated high temperature carbonation,” Cement and Concrete Research, vol. 64, pp. 11–16, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. R. Sahamitmongkol and T. Kishi, “Tensile behavior of restrained expansive mortar and concrete,” Cement and Concrete Composites, vol. 33, no. 1, pp. 131–141, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. H. G. Choi, M. Tsujino, T. Noguchi, and R. Kitagaki, “Application to buildings and cracking control effects of expansion concrete,” Cement Science and Concrete Technology, vol. 67, pp. 583–596, 2014. View at Google Scholar
  12. H. G. Choi, A study on the macro prediction of shrinkage-reduction behavior in concrete using expansive additives [Ph.D. thesis], The University of Tokyo, Tokyo, Japan, 2013.
  13. H. G. Choi, M. K. Lim, H. S. Choi, T. Noguchi, and R. Kitagaki, “Modelling of creep of concrete mixed with expansive additives,” Magazine of Concrete Research, vol. 67, no. 7, pp. 335–348, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. S. J. Lokhorst and K. van Breugel, “Simulation of the effect of geometrical changes of the microstructure on the deformational behaviour of hardening concrete,” Cement and Concrete Research, vol. 27, no. 10, pp. 1465–1479, 1997. View at Publisher · View at Google Scholar · View at Scopus
  15. I. Maruyama, Time dependent property of cement based materials on the basis of micro-mechanics [Ph.D. thesis], The University of Tokyo, Tokyo, Japan, 2003.
  16. I. Maruyama, T. Noguchi, P. Lura, and K. van Breugel, “Calculation of self-induced stress in early-age concrete using creep and relaxation model,” in Proceedings 1st FIB Congress Concrete structures in the 21st Century, vol. 1, Session 9, pp. 215–221, Osaka, Japan, 2002.
  17. T. C. Powers and T. L. Brownyard, “Studies of the physical properties of hardened Portland cement paste,” Journal of the American Concrete Institute (Proceedings), vol. 43, no. 9, pp. 469–504, 1974. View at Google Scholar
  18. K. Yamamoto, M. Morioka, E. Sakai, and M. Daimon, “Expansion mechanism of cement added with expansive additive,” Concrete Research and Technology, vol. 14, no. 3, pp. 23–31, 2003. View at Publisher · View at Google Scholar
  19. K. van Breugel and S. J. Lokhorst, “The role of microstructural development on creep and relaxation of hardening concrete,” in Proceedings of the International RILEM Conference on Early Age Cracking in Cementitious Systems, pp. 3–10, RILEM Publications, 2003.
  20. M. Taniguchi, O. Katsura, and Y. Hama, “Influence of type of cement on temperature dependency of the strength development of mortar,” Proceedings of the Japan Concrete Institute, vol. 31, no. 1, pp. 415–420, 2009. View at Google Scholar
  21. R. H. Bogue, The Chemistry of Portland Cement, Reinhold, New York, NY, USA, 1955.
  22. AASHTO (American Association of State Highway and Transportation Officials), Standard Practice for Estimating the Crack Tendency of Concrete, AASHTO, 1998.
  23. A. C. Ugural and S. K. Fenster, Advanced Strength and Applied Elasticity, Prentice Hall PTR, Upper Saddle River, NJ, USA, 3rd edition, 1995.
  24. A. B. Hossain and J. Weiss, “Assessing residual stress development and stress relaxation in restrained concrete ring specimens,” Cement and Concrete Composites, vol. 26, no. 5, pp. 531–540, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. W. J. Weiss and S. Fergeson, “Restrained shrinkage testing. The impact of specimen geometry on quality control testing for material performance assessment,” in Concreep 6, Creep, Shrinkage, and Durability Mechanic of Concrete and Other Quasi-Brittle Materials, F. J. Ulm, Z. P. Bazant, and F. H. Wittman, Eds., pp. 645–651, Elsevier, Cambridge, Mass, USA, 2001. View at Google Scholar
  26. H. Hashida, T. Kikuchi, M. Tsujino, and H. Tanaka, “Low shrinkage concrete with both expansive additive and limestone aggregates (part3 initial expansion force and shrinkage reducing effect,” in Proceedings of the Summaries of Technical Papers of Annual Meeting, pp. 927–928, Architectural Institute of Japan, 2010.
  27. H. Momose and T. Kanda, “Quantitative estimation of drying shrinkage reduction effects due to an expansive additive,” Journal of Structural and Construction Engineering, vol. 76, no. 666, pp. 1367–1373, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. H. G. Choi and T. Noguchi, “Modeling of mechanical properties of concrete mixed with expansive additive,” International Journal of Concrete Structures and Materials, vol. 9, no. 4, pp. 391–399, 2015. View at Google Scholar
  29. C. Hua, A. Ehrlacher, and P. Acker, “Analyses and models of the autogenous shrinkage of hardening cement paste II. Modelling at scale of hydrating grains,” Cement and Concrete Research, vol. 27, no. 2, pp. 245–258, 1997. View at Publisher · View at Google Scholar · View at Scopus