Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 2507316, 11 pages
http://dx.doi.org/10.1155/2016/2507316
Research Article

Experimental Investigation of the Matching Relationship between Asphalt Particle and Reservoir Pore in Profile Control Process

1The Sixth Oil Production Co., PetroChina Daqing Oilfield Company Ltd., Daqing 163000, China
2China University of Petroleum, Beijing 102249, China

Received 1 October 2015; Revised 5 January 2016; Accepted 10 February 2016

Academic Editor: Kohji Tashiro

Copyright © 2016 Chengfeng Ren et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Liu, J. Hou, B. Song, X. Zhou, H. Chen, and L. Zhang, “Characterization of interlayers within braided-river thick sandstones: a case study on the Lamadian Oilfield in Daqing,” Acta Petrolei Sinica, vol. 32, no. 5, pp. 836–841, 2011. View at Google Scholar · View at Scopus
  2. Y.-B. Lin, J. Zhang, X.-G. Liu, and H.-T. Zhou, “Pore structure features of reservoirs at late high water-cut stage, Lamadian Oilfield, Daqing, China,” Petroleum Exploration and Development, vol. 35, no. 2, pp. 215–219, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Chen, X. Song, and J. Li, “Dominant flow channels of point-bar reservoirs and their control on the distribution of remaining oils,” Acta Petrolei Sinica, vol. 33, no. 2, pp. 257–263, 2012. View at Google Scholar · View at Scopus
  4. M. Sun and Z. Li, “Identification and description of preferential path for water-flooding sandstone reservoir,” Xinjiang Oil & Gas, vol. 5, no. 1, pp. 51–56, 2009. View at Google Scholar
  5. L. Jiang and Z. Wang, “Water invasion characteristics and potentiality analysis of Daqing Sapu reservoir in high water cut stage,” Oil & Gas Field Surface Engineering, vol. 26, no. 5, pp. 26–27, 2007. View at Google Scholar
  6. R. C. Smith and R. J. Steffensen, “Interpretation of temperature profiles in water-injection wells,” Journal of Petroleum Technology, vol. 27, no. 6, Article ID SPE-4649-PA, pp. 777–784, 1975. View at Publisher · View at Google Scholar
  7. H. H. Kaveler and Z. Z. Hunter, “Observations from profile logs of water injection wells,” Journal of Petroleum Technology, vol. 4, no. 5, Article ID SPE-133-G, 1952. View at Publisher · View at Google Scholar
  8. P. Glenat, G. Zaborowski, and A. Loppinet, “Profile modification in water injection wells by polymer treatments,” in Proceedings of the Abu Dhabi International Petroleum Exhibition and Conference, SPE-36212-MS, Abu Dhabi, UAE, October 1996. View at Publisher · View at Google Scholar
  9. Y. Shiyi, M. Dong, W. Qiang, and Y. Hua, “Numerical simulation study on weak gel injection,” in Proceedings of the SPE Asia Pacific Oil and Gas Conference and Exhibition, Winning Technology and Teamwork (APOGCE '00), pp. 197–206, Brisbane, Australia, October 2000. View at Scopus
  10. A. Al-Ibadi and F. Civan, “Experimental investigation and correlation of treatment in weak and high-permeability formations by use of gel particles,” SPE Production & Operations, vol. 28, no. 4, Article ID SPE-153557-PA, pp. 387–401, 2013. View at Publisher · View at Google Scholar
  11. J. D. Purkaple and L. E. Summers, “Evaluation of commercial crosslinked polyacrylamide gel systems for injection profile modification,” in Proceedings of the SPE Enhanced Oil Recovery Symposium, SPE-17331-MS, Society of Petroleum Engineers, Tulsa, Okla, USA, April 1988. View at Publisher · View at Google Scholar
  12. J. Zhao, X. Kang, and J. Zhan, “Domestic progress of oil field profile control technology,” Metal Materials and Metallurgy Engineering, vol. 40, no. 1, pp. 65–71, 2012. View at Google Scholar
  13. X. Lin, K. Yang, and J. Li, “Study on the stability of SBR latex modified asphalt,” Petroleum Asphalt, vol. 20, no. 2, pp. 19–22, 2006. View at Google Scholar
  14. B. Gao, “Bitumen particles profile control technique in Lamadian Oilfield,” Daqing Petroleum Geology and Development, vol. 25, no. 4, pp. 96–97, 2006. View at Google Scholar
  15. T. Wu, H. Li, X. Yi, and Y. Zhang, “Core plugging performance tests for graft starch polymer,” Drilling & Production Technology, vol. 31, no. 5, pp. 121–124, 2008. View at Google Scholar