Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 2605602, 11 pages
http://dx.doi.org/10.1155/2016/2605602
Research Article

An Approach Based on the Exploratory Data Analysis to Relate the Wear Behavior with the Microstructure of Ductile Cast Irons

1Facultad de Ingeniería, Universidad Autónoma de Querétaro (UAQ), Avenida Rio Moctezuma 249, Colonia San Cayetano, 76807 San Juan del Río, QRO, Mexico
2Facultad de Ingeniería, Universidad Autónoma de Querétaro (UAQ), Cerro de las Campanas S/N, Colonia las Campanas, 76010 Santiago de Querétaro, QRO, Mexico

Received 8 September 2015; Accepted 27 December 2015

Academic Editor: Peter Majewski

Copyright © 2016 Jesus A. Basurto-Hurtado et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. C. Murcia, E. A. Ossa, and D. J. Celentano, “Nodule evolution of ductile cast iron during solidification,” Metallurgical and Materials Transactions B, vol. 45, no. 2, pp. 707–718, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. I. Hervas, M. B. Bettaieb, A. Thuault, and E. Hug, “Graphite nodule morphology as an indicator of the local complex strain state in ductile cast iron,” Materials & Design, vol. 52, pp. 524–532, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. K. F. Alabeedi, J. H. Abboud, and K. Y. Benyounis, “Microstructure and erosion resistance enhancement of nodular cast iron by laser melting,” Wear, vol. 266, no. 9-10, pp. 925–933, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. K. M. Pedersen and N. S. Tiedje, “Graphite nodule count and size distribution in thin-walled ductile cast iron,” Materials Characterization, vol. 59, no. 8, pp. 1111–1121, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. V. D. Cocco, F. Iacoviello, A. Rossi, and D. Iacoviello, “Macro and microscopical approach to the damaging micromechanisms analysis in a ferritic ductile cast iron,” Theoretical and Applied Fracture Mechanics, vol. 69, pp. 26–33, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Khorsand, M. Ghaffari, and E. Ganjeh, “Microstructural association between mechanical behavior with bending fracture surfaces in Astaloy CrA sintered parts alloyed by Cu and C,” Materials & Design, vol. 55, pp. 979–986, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Likhite, D. R. Peshwe, and S. U. Pathak, “Effect of graphite morphology on modulus of elasticity of low carbon equivalent ductile iron,” Transactions of the Indian Institute of Metals, vol. 61, no. 6, pp. 497–501, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Rüssel, L. Krüger, S. Martin, and W. Kreuzer, “Microstructural and fracture toughness characterisation of a high-strength FeCrMoVC alloy manufactured by rapid solidification,” Engineering Fracture Mechanics, vol. 99, pp. 278–294, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Delprete and R. Sesana, “Experimental characterization of a Si-Mo-Cr ductile cast iron,” Materials & Design, vol. 57, pp. 528–537, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Jabbari, P. Davami, and N. Varahram, “Numerical modeling and experimental validation of microstructure in gray cast iron,” International Journal of Minerals, Metallurgy and Materials, vol. 19, no. 10, pp. 908–914, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. P. Tao, H. Yu, Y. Fan, and Y. Fu, “Effects of cooling method after intercritical heat treatment on microstructural characteristics and mechanical properties of as-cast high-strength low-alloy steel,” Materials & Design, vol. 54, pp. 914–923, 2013. View at Publisher · View at Google Scholar
  12. C. A. Paredes-Orta, F. Manriquez-Guerrero, J. Torres-González, F. Castañeda, and I. R. Terol-Villalobos, “Wear characterization of nodular cast iron based on clusters of nodules,” Advanced Materials Research, vol. 976, pp. 184–188, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. H.-T. Cao, X.-P. Dong, Q.-W. Huang, Z. Pan, J.-J. Li, and Z.-T. Fan, “Effect of scanning speed during PTA remelting treatment on the microstructure and wear resistance of nodular cast iron,” International Journal of Minerals, Metallurgy and Materials, vol. 21, no. 4, pp. 363–370, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Hassani, A. Habibollahzadeh, and S. Sadeghinejad, “Influence of vanadium and chromium additions on the wear resistance of a gray cast iron,” International Journal of Minerals, Metallurgy and Materials, vol. 19, no. 7, pp. 602–607, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. Y.-Z. Xing, Q.-L. Wei, C.-P. Jiang, and J.-M. Hao, “Abrasive wear behavior of cast iron coatings plasma-sprayed at different mild steel substrate temperatures,” International Journal of Minerals, Metallurgy and Materials, vol. 19, no. 8, pp. 733–738, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Natxiondo, R. Suárez, J. Sertucha, and P. Larrañaga, “Graphite and solid fraction evolutions during solidification of nodular cast irons,” Metals, vol. 5, no. 1, pp. 239–255, 2015. View at Publisher · View at Google Scholar
  17. L. Song, E. Guo, L. Wang, and D. Liu, “Effects of silicon on mechanical properties and fracture toughness of heavy-section ductile cast iron,” Metals, vol. 5, no. 1, pp. 150–161, 2015. View at Publisher · View at Google Scholar
  18. T. Matsushita, E. Ghassemali, A. G. Saro, L. Elmquist, and A. E. Jarfors, “On thermal expansion and density of CGI and SGI cast irons,” Metals, vol. 5, no. 2, pp. 1000–1019, 2015. View at Google Scholar
  19. N. Haghdadi, B. Bazaz, H. R. Erfanian-Naziftoosi, and A. R. Kiani-Rashid, “Microstructural and mechanical characteristics of Al-alloyed ductile iron upon casting and annealing,” International Journal of Minerals, Metallurgy and Materials, vol. 19, no. 9, pp. 812–820, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. X. Sun, Y. Wang, D. Y. Li, and G. Wang, “Modification of carbidic austempered ductile iron with nano ceria for improved mechanical properties and abrasive wear resistance,” Wear, vol. 301, no. 1-2, pp. 116–121, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. R. Konečná, G. Nicoletto, L. Bubenko, and S. Fintová, “A comparative study of the fatigue behavior of two heat-treated nodular cast irons,” Engineering Fracture Mechanics, vol. 108, pp. 251–262, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Zhao, “Effect of low temperature heat treatment on different original graphite microstructures of nodular cast iron,” Research Journal of Applied Sciences, Engineering and Technology, vol. 6, no. 14, pp. 2621–2624, 2013. View at Google Scholar · View at Scopus
  23. Y.-C. Peng, H.-J. Jin, J.-H. Liu, and G.-L. Li, “Influence of cooling rate on the microstructure and properties of a new wear resistant Carbidic Austempered Ductile Iron (CADI),” Materials Characterization, vol. 72, pp. 53–58, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. P. Čanžar, Z. Tonković, and J. Kodvanj, “Microstructure influence on fatigue behaviour of nodular cast iron,” Materials Science and Engineering A, vol. 556, pp. 88–99, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Hatate, T. Shiota, N. Takahashi, and K. Shimizu, “Influences of graphite shapes on wear characteristics of austempered cast iron,” Wear, vol. 250-251, no. 2, pp. 885–889, 2001. View at Google Scholar · View at Scopus
  26. R. C. Dommarco and J. D. Salvande, “Contact fatigue resistance of austempered and partially chilled ductile irons,” Wear, vol. 254, no. 3-4, pp. 230–236, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. R. C. Dommarco, A. J. Jaureguiberry, and J. A. Sikora, “Rolling contact fatigue resistance of ductile iron with different nodule counts and matrix microstructures,” Wear, vol. 261, no. 2, pp. 172–179, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. L. A. Morales-Hernández, I. R. Terol-Villalobos, A. Domínguez-González, F. Manríquez-Guerrero, and G. Herrera-Ruiz, “Spatial distribution and spheroidicity characterization of graphite nodules based on morphological tools,” Journal of Materials Processing Technology, vol. 210, no. 2, pp. 335–342, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. Q. Liu, H. Shibata, P. Hedström, P. G. Jönsson, and K. Nakajima, “Dynamic precipitation behavior of secondary M7C3 carbides in Ti-alloyed high chromium cast iron,” ISIJ International, vol. 53, no. 7, pp. 1237–1244, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Escobar, D. Celentano, M. Cruchaga, and B. Schulz, “On the effect of pouring temperature on spheroidal graphite cast iron solidification,” Metals, vol. 5, no. 2, pp. 628–647, 2015. View at Publisher · View at Google Scholar
  31. J. Serra, Image Analysis and Mathematical Morphology, Academic Press, New York, NY, USA, 1982.
  32. S. Lem, P. Onghena, L. Verschaffel, and W. Van Dooren, “The heuristic interpretation of box plots,” Learning and Instruction, vol. 26, pp. 22–35, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. S. Lem, G. Kempen, E. Ceulemans, P. Onghena, L. Verschaffel, and W. Van Dooren, “Combining multiple external representations and refutational text: an intervention on learning to interpret box plots,” International Journal of Science and Mathematics Education, vol. 13, no. 4, pp. 909–926, 2015. View at Publisher · View at Google Scholar · View at Scopus